Xducer on a OK Trident help

[old_rookie]

How does a Garmin xducer like this

http://www.thebcgpsstore.ca/images/P/garmin_echo_fishfinder_transducer,%20transom-trolling%20motor%20mount_dual%20beam.jpg

Mount into the scupper like this

http://i228.photobucket.com/albums/ee189/discofitter/100_1008.jpg

Buy a special bracket?

[GregAndrew]

Might be able to make a mount for that pretty simple. Cut off the threaded intake tube from an old through-hull bait pump. Use a rivet or nut and bolt through the holes on your Xducer and a couple matching holes through the threaded pipe. Use the tapered plastic nut and rubber seal that comes with the through-hull pump to cinch it into place. Then just feed the wire through the tube. I would cut the tube off flush with the top of the tapered nut and keep the tube open to allow water to drain. I can provide some pics if you need them.

[Jimmyz123]

http://www.google.com/products/catalog?hl=en&q=transducer+mount+for+a+kayak&gs_upl=0l0l1l302l0l0l0l0l0l0l0l0ll0l0&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1024&bih=665&um=1&ie=UTF-8&tbm=shop&cid=7501505340756739685&sa=X&ei=n3cAT-ucFK_KsQL8jJ22AQ&ved=0CH4Q8wIwAw

Use something like this, or you can mount your transducer inside your Kayak. There's a non permanent way to mount the ducer inside the yak using electrical putty. If you want to use the putty trick let me know I can hook you up.

[old_rookie]

GregAndrew - thanks for the idea. Thinking something in the landscape dept. at home depot might have those threaded pipes.

JZ123 - I saw that device too - just not clear enough to see if it will work with the xducer or not.