side handle leak

[skrilla]

I performed a leak test on my Scrambler 11 and found both side handles were leaking from the rivets, 8 rivets total. Should I be concerned or is this normal? They look to be well above the water line but still in the "splash zone". Would a bead of silicone help keep water from coming in or should I consider re-riveting using a sealant? Also will the stress of using the side handles for transport negate any of the work performed? I have no access from the inside. Any expert advice is appreciated.

[DanaPT]

don't fret, but pick up a manual bilge pump like this: http://www.google.com/products/catalog?hl=en&client=firefox-a&hs=94i&rls=org.mozilla:en-US:official&channel=fflb&q=manual+bilge+pump&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&biw=1152&bih=774&um=1&ie=UTF-8&tbm=shop&cid=2064053084124757506&sa=X&ei=g9rET-GbFoTe2QWTzvGIAQ&ved=0COIBEPMCMAA

Look to keep it somewhere handy, but I'm doubting you'd need it for the rivet holes. I get small amounts of water in my hull that I sponge out at the end of each session.

Good luck.