Transducer question

[entropy68]

I have been lurking around here for over two years and have finally purchased a Malibu Stealth 14. I just received my fishfinder, a Lowrance Mark-4 DSI in the mail today. I have been researching how to mount this and had what is probably a bad idea but figured I would ask anyway. I am thinking about doing a scupper mount but not using anything other than epoxy or ? to hold the transducer in place. Sorry about the fat thumb in the picture but hopefully I have explained this good enough. Thank you in advance and I am looking forward to meeting you out on the water
http://by170w.bay170.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=74690022-ba74-11e1-83b3-001e0bcc1a28&Aux=14|0|8CF1C9860225A00||0|0|0|0||&maxwidth=220&maxheight=160&size=Att&blob=MHwyMDEyLTA2LTE5XzE4LTA0LTUyXzkyNi5qcGd8aW1hZ 2UvanBlZw_3d_3d

[JNAST13ST]

I have been lurking around here for over two years and have finally purchased a Malibu Stealth 14. I just received my fishfinder, a Lowrance Mark-4 DSI in the mail today. I have been researching how to mount this and had what is probably a bad idea but figured I would ask anyway. I am thinking about doing a scupper mount but not using anything other than epoxy or ? to hold the transducer in place. Sorry about the fat thumb in the picture but hopefully I have explained this good enough. Thank you in advance and I am looking forward to meeting you out on the water
http://by170w.bay170.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=74690022-ba74-11e1-83b3-001e0bcc1a28&Aux=14|0|8CF1C9860225A00||0|0|0|0||&maxwidth=220&maxheight=160&size=Att&blob=MHwyMDEyLTA2LTE5XzE4LTA0LTUyXzkyNi5qcGd8aW1hZ 2UvanBlZw_3d_3d

I've posted a few pics on my scupper mount i had put in, I ordered it from bass pro shop and the transducer slides right on no epoxy or anything supper clean. Im really happy with it, doesnt seem to be a problem on the ground but time will tell.

[entropy68]

Thanks for the speedy reply. Your mount looks great, I was just thinking without the mount and using some sort of adhesive I could accomplish three things.
1. Save fifty Dollars for the mount
2. Bring the transducer closer to the yak
3. Leave the scupper hole open
I will probably end up purchasing the scupper mount. Thank you