PA 12 and Outback new option

[Iceman]

You can swap out the "tackle management" for the rec bucket for $20 on the PA 12 center hatch. You can also replace the round 8" on the Outback with the rec hatch, add the bucket, hardware and free install for $120 :D

http://www.bigwatersedge.com/bwegallery/data/500/IMG_07471.JPG

[bus kid]

Could you make it fit a revo, or is there some super secret squirrel stuff in the works worth waiting for?

[wade]

Nice 1 Hobie!, I'll take 1 please...

[fishingfiend]

Very interested in the conversion of the center hatch on the Outback. Would the PA tackle system still work on an outback? ie. the fold out trays.

Is the deep bucket actually sturdy, because the one for the Outback is too flimsy when you put some weight in there.

[jorluivil]

Holy crap..... a few weeks ago I was talking to the boys about doing something like this on my outback. Does an authorized retailer need to do the work in order to keep the hull warranty active or can this be done as a DIY job?

[Iceman]

This would not fit the Revo, the tackle management could be added to the Outback and this box could be loaded down with lead. Angles=structural strength. You could install yourself. Warranty in tact

I have the hatches/ tackle management racks and the buckets in stock.

[fishingfiend]

I will soon have a little less PA envy! :D Great post, I'll be coming in for parts when I can get down that way.

[Scion619]

You can swap out the "tackle management" for the rec bucket for $20 on the PA 12 center hatch. You can also replace the round 8" on the Outback with the rec hatch, add the bucket, hardware and free install for $120 :D

http://www.bigwatersedge.com/bwegallery/data/500/IMG_07471.JPG

Very interested pm sent

[JNAST13ST]

This is for the the front hatch right?
Dumb question?

[inbx3]

Why install yourself? It says free install.

[dc1983]

Interested!!! What are the dimensions of the replacement hatch for the outback?

[bus kid]

Why install yourself? It says free install.

some people fish cant afford to take a day off from fishing. :D

[steveooo]

That is sexy. Looks big enough to fit 2 whole roast chickens. Great job Hobie!

[bigbarrels]

Nice Andy! I will be in after the first of the year for a Pro Angler 12:D Wife gave me the green light:luxhello:

[jorluivil]

some people fish cant afford to take a day off from fishing. :D

wooooord

[roadx]

dimensions please, also i *think everyone is curious if the lip on the new bucket is sturdy enough not to drop through the open when it has a lot of weight in it. the outback deep bucket can be PITA.

[Matar]

And can you post pictures of the hatch installed on an outback.

[jaws197]

Anxiously awaiting some more pics and info please? I would love to have this done to my outback!:drool5:
And free install???
:you_rock:

[Iceman]

11X14 3/4 is the outer dimension. Once I install one in an Outback I'll post it up.

It will hold some weight.

http://www.bigwatersedge.com/bwegallery/data/500/IMG_07481.JPG

[Iceman]

size comparison this is the backing plate for the hatch.

http://www.bigwatersedge.com/bwegallery/data/500/IMG_0751.JPG

[jorluivil]

11X14 3/4 is the outer dimension. Once I install one in an Outback I'll post it up.

It will hold some weight.

http://www.bigwatersedge.com/bwegallery/data/500/IMG_07481.JPG


SWEEEEET!!!

Now I have enough battery power to install a radar on my yak!

[dc1983]

size comparison this is the backing plate for the hatch.

http://www.bigwatersedge.com/bwegallery/data/500/IMG_0751.JPG

As soon as I come up with an excuse to drop my outback off I'll be giving you a call.

[roadx]

ok..... whats the depth of the bucket ? :D

[finyak]

That's too cool,I've always wondered why they had the round hatch.I want one for sure.

[jbaker]

I have two questions regarding the install on the outback, first the mirage drive tie down and pad eye loctated on either side of the round hatch, ae you going over them or off setting the hatch! It looks like the out side edge of the hatch will only cover half the threaded hole. Secondly, the round hatch has a lip on the rear 1/2" from the edge of the hatch rim. It looks like in the picture your stratling the lip, won't that leave a void under the hatch and not letting the hatch seal properly?

[erinoo]

Andy...Does Brent have any of those buckets for the pa 12..???

[Iceman]

buckets are 5" deep, here is another angle to show you how it will sit. The new 2013 even have the 4 corners dimpled to show you where to drill out.

Brent does not have em Eric, but I can get you one.

http://www.bigwatersedge.com/bwegallery/data/500/IMG_0752.JPG

[JNAST13ST]

They don't have them at mission?

[fishingfiend]

Thanks for the picture! Do the center hatch screws at the 12/6 positions line up with the PA trim ring?

http://fishingfiend.smugmug.com/Other/Misc/i-jgfkJZf/0/L/trim-L.jpg

[Iceman]

It looks like those existing holes should line up. Once I get around to installing one I'll confirm.

[walrus]

Will it fit an Oasis, I keep looking at the pictures and looks like it might.

If the answer is "yes", will Mission Bay be able to install?

[Matar]

Got mine in the mail yesturday and the holes do not line up on mine at least. I have an 2010 model and the bunngie and tiedown plug lands right on the trim ring. I would have to cut the backing ring or cut out the molded in threads for it to work. I am going to try and lay the whole thing out tonight and see if it will work or not before i start cutting and let you guys know how is turns out. Also the lip on the backside of the round hatch with be cut out as the whole thing is bigger.

[Matar]

installed just need to fine tune.

[fishingfiend]

Looks great, thanks for taking the plunge and sharing! It looks like the edges of the bungie and tiedown plug are still slightly exposed? After your fine tuning, would you share a couple more close up pics of the side? Also, how do you like it? Is it sturdy?

[romspacenut]

Andy, do you think this would work with the Hobie Adventure Island?

[StinkyMatt]

Can someone say bait tank?


:D:D:D


With just a little more tinkering I see someone putting in a bait tank right there. Kind of like the "kaya tank"


Wouldnt it be great if Hobie made a factory tank option to put right there? Imagine all the room behind you without that big tank?


2013 Hobie product of the year award!:luxhello:

[Deefeesha]

Looks great! Now I need one.

[Iceman]

Matt,

Glad it worked out! I had not checked older models as I only had access to 2012. Thanks for posting up the modifications needed.

No this would not work on the Adventures.

[steveooo]

Those pics look familiar...:rolleyes:

Here is my first outback from June 2005

http://i35.photobucket.com/albums/d154/bigsteveorr/file-82.jpg

The boat hatch I installed to try to get a little more storage. It leaked like a SOB.

http://i35.photobucket.com/albums/d154/bigsteveorr/file-81.jpg

Back when rats, tights, and water shoes were cool...

http://i35.photobucket.com/albums/d154/bigsteveorr/file-83.jpg

Mac's were cool enough to me to take pictures of...

http://i35.photobucket.com/albums/d154/bigsteveorr/file-84.jpg

Until I caught one of these- that was the beginning of the end. Can you say cluttered deck?

http://i35.photobucket.com/albums/d154/bigsteveorr/file-85.jpg

When can I expect my royalty check from Hobie? :D

With how much thought Hobie puts into the smallest detail of everything they make, I'm sure this will be a pretty awesome upgrade.

[jaws197]

Iceman,
I have a 2012 outback and wondered if you had any pics yet on the install and final of the new hatch yet? Wonder hoe the mirage drive bungee attachment point will be when this is done?

[TJones]

this conversion will not work on revolution? revo no deep enough i would imagine? to convert you cut out old hatch?

[bus kid]

this conversion will not work on revolution? revo no deep enough i would imagine? to convert you cut out old hatch?

The revo is not wide enough and the contour of the area where the round hatch is would not fit the hatch as its flat. You could however install it in the back length wise.
My concern with the conversion for the out back is the structural integraty of the top deck after you remove all the surface area

[Iceman]

the structural integraty of the top deck after you remove all the surface area

This would be a problem...........if you cut the hole and then did not install the hatch :D

[JNAST13ST]

How much would it cost to ship it down to San Diego?

[JNAST13ST]

Have you tested it yet? Any leaks?

[Matar]

Running a hose over it for 20 min and no leaks. Goop was my friend.

[Iceman]

Shipping is about $7 for the hatch+85 hatch=$7 hardware+$20 bucket.

[porkchopcb]

Sorry I'm new, where do I have to go to drop it off?

[Iceman]

OEX Sunset Beach
562-592-0800

[Scion619]

Just got this in yesterday ..... Perfect for storing my plastics !!! Thanks Andy and oex sunset beach!!!!!!
http://i27.photobucket.com/albums/c157/scion619/3F04F7A1-E9FC-4EA7-8464-359E03D6D0DE-770-00000177008664A5.jpg

[bbarton13]

i wonder if you would be able to put this hatch on the older pa 14. and get rid of the raised hatch?

[Iceman]

You can not swap out the original Pro Anglers hatch for the new rec hatch, even if it was turned sideways it would not work..........I checked for someone awhile back.

[Rik]

FYI, The Rec Hatch conversion for the Outback is ONLY for 2013 Outbacks.

[Rik]

Andy...Does Brent have any of those buckets for the pa 12..???

We will have them at Oceanside when they are in stock. Hobie has them on back order as of today

[Rik]

They don't have them at mission?

Nope, only Hobie Dealers can carry Hobie Parts.... We will have them at Oceanside when they are back in stock

[samualson]

FYI, The Rec Hatch conversion for the Outback is ONLY for 2013 Outbacks.



I have a 2013 Outback and it is marked for the rectangular hatch, however i also have a 2010 Outback and the area where the rec hatch would go is identical to the 2013 Outback.

The only difference is that the 2013 model is marked in the corners for it but everything else is the same so the hatch should fit Outbacks going back quite a few years, you just have to measure for yourself.

[samualson]

installed just need to fine tune.




Looks good but it also looks like it could be a major pita to open while seated.

[Matar]

Looks good but it also looks like it could be a major pita to open while seated.

Yah not to bad but a pain.

[TJones]

:cheers1:

[Matar]

:cheers1:

A 1/5th