La Jolla Webcam support

[lambadmin]

Please post here if you have problems seeing the webcam video.

It is likely that if there are problems, the same ones may be shared among multiple folks. This way we'll have the fix available for everyone.

Please put a thorough description of your issue, indicate what OS are you using (Vista, XP, mac OS) and what browser (Internet Explorer version X, Firefox ver X, etc.).

The common problem may be related to the ActiveX control installation.

As you hit the webcam page for the 1st time, you will be prompted to install it. The horizontal gray bar will be displayed on the top of your browser screen alerting you about needed Active X control.

http://www.bigwatersedge.com/webcam/help/axis_activex.JPG

You must say yes / allow this installation, or you will just see an empty frame or a still picture instead of the video feed. If your browser security settings are set too tight (to disable ActiveX installation, or even disable the prompt) - you won't be able to install it, you may not even see the prompt. To fix it, you will need to go to your browser security settings and allow Active X installation (Tools, Internet Options, Security Tab, modify security settings for "Internet zone" to allow Active X).

After 30 seconds, you will see the "Connection Lost for The Video Stream". This is normal, the camera is configured to let each connection view the video only for 30 seconds. The idea is to preserve the bandwidth, let other people enjoy the webcam video feed.

If we do happen to have a ton of people trying to see the webcam at the same time - the performance degrades, disconnects/timeouts may occur... Refreshing the page ought to get you back in business.

Reminder - for this initial release, only the accounts of folks who signed up for West Coast Whoppers 2007 have been granted permissions to access the webcam.

[nmbrinkman]

I didn't get message you display in the picture above but I did download, unzip and install the program off the internet and I still can't view the camera... I hate cumputurs....

[quietman]

stupid windows vista is giving me trouble installing the viewing software...
:mad:

[Jim Sammons LJKF]

I can't view it either and I am on XP so don't feel too bad. If I turn off my internet security it works but really don't want to do that. Adi is working on it.

[nmbrinkman]

I can snap a picture I just don't get the video stream... The picture is fine though. That's all we really want anyway..

[tylerdurden]

...If I turn off my internet security it works but really don't want to do that...

Ditto.

[lambadmin]

We have some issues on some clients – that’s normal. We’ll try to work through them.

There’s a million things that could prevent the video stream – your browser security settings, your security software, work or home firewall, permission level you have (or better say don’t have) on your local computer, some problem with your PC – the list goes on and on.

Here is a couple of tips:

Disable your security software temporarily to see it that’s standing in the way. (Norton Interent Security, MacAfee, Trend Micro, whatever you may have on your machine),

We know for sure Norton Internet Security (at least version 2006) is blocking the feed. I tested with Norton Corporate 10 and 11, Trend Micro a couple of versions and it worked fine.

If your personal firewall/security software (or Vista built in stuff) is triggering warnings the 1st time you try to see the video, make sure you tell it "it’s OK".

We’ll figure out the exact changes that will need to be made in your security SW to allow the video traffic. IN the meantime, you have your workaround - turn it off for a minute.


Make sure you install camera ActiveX control from Axis and that the installation goes well.

The web cam page will "push" the control your way. No need to go any other place to install it.

Verify you see the Axis Media control.

If you're running Internet Explorer version 7, click on:

- Tools
- Manage Add-ons
- Enable or Disable Add-ons
- Find Axis Media Control Emb Class add on the list. Make sure it’s enabled

If Internet Explorer Version 6, click on:

- Tools
- Manage Add-Ons
- Find Axis Media Control Emb Class add on the list. Make sure it’s enabled.

http://www.bigwatersedge.com/webcam/help/addons.JPG


If you don’t see the Axis Active X control, it probably wasn’t installed – your browser security settings have likely blocked it.


Go to

- Tools
- Internet Options
- Security tab

The easiest way to make sure all Active X settings will fly is to add http://www.bigwatersedge.com to the list of trusted sites.


Click on

- Trustes Sites
- Sites button
- Add http://www.bigwatersedge.com/

http://www.bigwatersedge.com/webcam/help/bwetrusted.JPG


As an alternative, you can

- select Internet zone
- click Custom button
- make sure that "Run Active X" and "Script Active X" are enabled

http://www.bigwatersedge.com/webcam/help/activex.JPG

Say OK,
restart the browser,
try to hit the web cam page again – you should see the prompt to install the Active X control.

Which brings up another potential problem:

Make sure your pop-up blocker doesn't get in the way.


OK, enough of tech talk for 1 post. Hope it helps some folks that have a problem viewing video.

John, what's your Vista moaning about?

Folks, more specific info you give me, better I'll be able to help out.

[chefchatten]

What do I need to do to get "permission" to access the cam?


chefchatten, you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

[lambadmin]

1. hang on a few days, we'll be opening up public access for webcam. Right now we're in pre-release - only the accounts of folks who play West Coast Whoppers have the "permission".

2. Sign up for WCW. :D Not that I'm trying to bribe you in or anything, not at all. I'm just providing technical answer to your closed ended question. If you can't wait a few days, that will get you "permission" instantly - access is security group membership based...

[wavster]

Adi, when you say open it up, will that be for registered BWE users only or for the
entire internet world? BWE only will help with bandwidth.

Let me say, I think think this is great. Great job to all involved!

[lambadmin]

Sure it would help the bandwidth, but this webcam ought to be as handy to everyone launching at the La Jolla Shores as it is to BWE members. BWE login account will not be required to see the video.

Webcam sponsors brought the camera to the whole community, not to any selective group of people via BWE or any other membership. ;)

Releasing it initially only to the WCW folks gives us a chance to fine tune the server and prepare for these common problems that some folks may encounter.

So far so good. If we don't hear more problem reports from the WCW gang, I think we'll be able to open up the webcam for everyone else real soon.

[Tman]

Wow...great job there fellas. Going big time.
I know this is reaching, but any way you can compile a video from the streamer of the greatest wipeouts?
Or a hot little turista having, let's just say, problems?

Regardless, way to go, I think for fun one day when the bite is wide open, you can just play a previous streamer of nasty arse conditions, keep the crowds down....lol

[lambadmin]

Thanks Martin.

FYI: the webcam server is not configured to capture the video... Just a real time stream.

That would have cost way more, and what we put in place already had a pretty steep price tag attached to it. ;)

[nmbrinkman]

I am still having issues viewing the stream. I did everything you mentioned including disabling my pop up blocker and restarting my web browser. Should I restart my computer? Anyway, I'm sure my issues are the least of your concerns.. thanks for the effort already paid.

[lambadmin]

Nate, reboots are highly recommended... Always.

What OS are you using (Vista, XP, mac OS)?
What browser (Internet Explorer version X, Firefox ver X, etc.)?
Any specific errors that pop up?
When on the webcam page, do you see the frame with nothing in it, some error within it (what error if you do), or no video frame at all (it should be above the "Snap a pic" button)?


Another valid troubleshooting step to try for eveyne with a problem:


Go to the Control Panel
Look for "Axis Media Control" applet.
http://www.bigwatersedge.com/webcam/help/cp.JPG
If it's not there, the Axis Active-X control was definitely never installed - that's your problem.
if it IS there, you should try re-installing it.
Open up "Add-Remove Programs" (on XP, in Vista it's called "Programs and Features"
Find "Axis Media Control Embedded". Uninstall/remove it.http://www.bigwatersedge.com/webcam/help/addremoveaxis.JPG


You may need to reboot. Always good idea. ;)
Go back to the web cam page - you should be prompted to install Axis ActiveX control again.

[tptrench]

:)How cool for you to out that camera!!!! Thanks Adi, you're the best!

[theyorkieterror]

I can run cam in foxfire using XP2 and Vista. It just loaded fine. Could it be that here at Rocky Top we "Git her done". I had to get that pun in there and hope to not make anyone mad. I really do enjoy viewing your pics and vids and thank you for allowing me to do that.:notworthy: :coffee: paddle on

[wbrewski]

I am using an I Mac and get the vido but it is all white, I can see shapes moving on the screen, Help.:yt::kayak-surfer:

[wbrewski]

got it fixed, it was just the sun at the time i was looking at it.

[One Rev]

I can't figure out what's happened. I have been able to view the webcam and now I can't. I went to the support page and realized that I don't have the Axis program on my computer. I am using Firefox and never had Axis installed and was viewing the Cam all along. I guess it finally caught up to me.
Where do I get the program because I don't get the warning message to download it.
Mike

[baerclaws]

The web cam has been down since yesterday afternoon.:(

[lambadmin]

That's right, thanks for reporting.

You know how it works with computer stuff - every once in a while, you have to reboot it.

Well, that can be a challenge when you don't have physical access to the device to actually do it.

Hang in in there, we're working on it.

Stay tuned, I'll post when we get it back up.

[Handymansd]

I have a couple of large hammers you can borrow to fix the camera if you would like to borrow them Adi!:viking:

[One Rev]

So it wasn't a conspiracy against me. I feel so much better now.

Mike
One Rev

[lambadmin]

Stopped by the shores launch a bit after 2:00 PM.

It was gloomy, but there was not a dash of wind, hardly any swell. The water was flat like a glass.

I spent some time trolling for LJSH IT guys and finally tracked them down...

They let me in the reboot the damn thing – it came right back up.

There's your report from me... :)

[One Rev]

How long will the concrete barrier last? The cones are gone.lol

[wavster]

I passed the cones on my way in this morning...

[Billy V]

I can snap pictures, but don't get the streaming video.

Is there a way to find, and download Active X for the video?

I'm using a Mac w/ Safari os.
-----------------
BTW my Mac laptop didn't have this trouble, it worked fine from the beginning.

[lambadmin]

I am really not sure about Macs, not my ball game. From what I gather, ActiveX and Mac is no go...

But then I think some Mac folks responded and said they can see the video? I hope some of the Mac gang chips in.

[steveooo]

I have a mac and have always been able to see the vid. I never even installed Active-X:stupid:

[Billy V]

I have a mac and have always been able to see the vid. I never even installed Active-X:stupid:

Thats the way it has been for my MacBookPro Laptop. The video played straight away, without installing any software.

Its my I-Mac desk top thats giving me the problem. I set the preferences to the same as the laptop, but I still can't view the web-cam from it yet.

Still trying :)

[fearnofish]

I just bought a new computer that has vista on it and am unable to get the cam to work. Like another user earlier in this thread I can snap a pic but can't see the video. I tried lowering my security settings and telling the system this is a trusted site. The message I get is:

"Axis Media Control
The AXIS Media Control, which enables you to view live image streams in Microsoft Internet Explorer, could not be registered on your computer."

Any suggestions?

Thanks!

[yakrider]

I just bought a new computer that has vista on it and am unable to get the cam to work. Like another user earlier in this thread I can snap a pic but can't see the video. I tried lowering my security settings and telling the system this is a trusted site. The message I get is:

"Axis Media Control
The AXIS Media Control, which enables you to view live image streams in Microsoft Internet Explorer, could not be registered on your computer."

Any suggestions?

Thanks!

exact same senario...
new computer...same message...
snap shot works....but...
I'm getting the same message on my new computer...

"Axis Media Control
The AXIS Media Control, which enables you to view live image streams in Microsoft Internet Explorer, could not be registered on your computer."

help...

[buttchaser]

Same problem , Just got vista and it didnt work , I downloaded firefox and Now Im able to see it :)

[pchen911]

Same problem same message. Got vista and couldn't get it to work.

I haven't seen the webcam for months now.

Is going firefox the only way? Did the Vista issue ever get solved?

[lambadmin]

There are no compatibility issues with Axis driver (webcam) and Vista... There are issues when it comes to getting anything work on Vista, if certain Vista security features are in place.

Try this - http://www.axis.com/techsup/faq/index.php/index_axis.php?action=artikel&cat=109&id=115324&artlang=en

Adding www.bigwatersedge.com (http://www.bigwatersedge.com) as a trusted site in your browser settings ought to do it. If it doesn't work, try adding 66.160.198.117, BWE's current IP.

Make sure your security software is not in a way - that's the most common reason for troubles.

[Quilted Germ]

For what it's worth, I can view the streaming video just fine....but I'm not running Vista....

[bigderel]

Got Vista, got IE, no el streamo...

Got Vista, got Firefox, no problemo...

:D

[h82sink]

I've got IE and Vista Ultimate on my laptop and it works fine. For those folks having issues are you running 32 or 64 bit vista? You can check by going to the SYSTEM icon in the control panel, or right clicking on COMPUTER and select PROPERTIES. Mine is 32 bit, but I know that many new computers from Dell and Sony preload the 64 bit version and there can be issues with a few programs and drivers.

[pchen911]

32 bit operating system.

Added http address, didn't help
Added IP address, didn't help
Lowered security level, didn't help

The web page prompts download as normal. Install go as normal until error message come up as:

Axis Media Control
The AXIS Media Control, which enables you to view live image streams in Microsoft Internet Explorer, could not be registered on your computer.

I don't mind getting firefox to watch the cam, but it seems like there has got to be a way to fix it.... Vista/IE is only getting more prevalent, more and more new systems sold now can't run properly on XP and some hardwares don't even have drivers for XP. (Not that I am a fan of Vista by a long shot).

[lamb]

Give manual DLL registration a shot - heads up, it's a bit technical:

http://www.axis.com/techsup/faq/index.php/index_axis.php?action=artikel&cat=0&id=34805&artlang=en&search=The+AXIS+Media+Control%2C+which+enables+you +to+view+live+image+streams+in+Microsoft+Internet+ Explorer%2C+could+not+be+registered+on+your+comput er

[pchen911]

Give manual DLL registration a shot - heads up, it's a bit technical:

http://www.axis.com/techsup/faq/index.php/index_axis.php?action=artikel&cat=0&id=34805&artlang=en&search=The+AXIS+Media+Control%2C+which+enables+you +to+view+live+image+streams+in+Microsoft+Internet+ Explorer%2C+could+not+be+registered+on+your+comput er

Woah... Yea, a bit technical... couldn't even get past the first step of downloading the file needed. (I have no idea what location they are referring to to download the .cab).

The rest of the steps seem pretty straight forward, but stuck on step 1...

I ended up just downloading Firefox and it worked perfectly. In less time than it took to try to read the instructions.

Felt like I chickened out... well, that's mainly because I did. LOL.

[mmmalins]

Other cams can display without having to install possible trojan software. It is idiotic to make you install something just to view a webcam. BYE!!!!

[Royak]

Can the webcam be seen with Windows 7? If not, when will that be fixed?

[-scallywag-]

its not your OS its most likely the browser your using. try installing mozilla firefox....much better all arount than explorer IMO plus you'll be able to see the web cam....

[dsafety]

The webcam displays fine on all of my computers using XP, Vista and Win 7. If you cannot see anything it is probably because you have a security setting that does not allow Active X to run. Try reducing your browser security settings to a less paranoid level.

In Internet Explorer go to Tools and then Internet Options. Under the Security tab play around with the security level until things work. I have my computers set for medium and have specifically allowed ActiveX to run.

I hope that this helps.

Bob

[habanero]

Thanks for this post. I've heard other people not able to enjoy the benefit of live LJ Conditions and it is definitely worth a little trouble shooting.

FYI: I'm using Windows 7 Pro and it works fine.

[Royak]

I installed Firefox and it works fine with LJ Webcam. Thanks!

[Quilted Germ]

No problem viewing LJ webcam, but the LJ Tide link doesn't work.....hasn't worked for awhile...

[blackcloud9]

New Tide Graph link -
http://www02.coconet.com:8080/locations/2888.html

[1Flatfish]

I used to be able to view the webcam, but now it doesn't load for me. What's up? I'm on a imac with OS X 10.5.2. Any ideas?

Wayne

[dsafety]

I am experiencing a similar problem. I have several computers running all the versions of Windows that can view the feed without a problem. I decided to get rid of Vista on one of them and install Win7. For some reason this computer will no longer view the site. I know the problem is some sort of setting on this maching but have been unable to figure it out.

When I try to download the ActiveX file that enables viewing, I get the message that this file cannot be registered on this computer. It must be some security setting but so far I am stumped.

I went to another computer running Win7 that used to be able to view the camera feed. Now this one cannot see the page either. I am pretty good with computer stuff but this problem is beyond me a the moment. Anyone have suggestions?

Bob

[Pescavore1]

I couldn't get it to work using Windows Explorer browser on Windows Vista so I downloaded Google Chrome browser and it works fine. I use Chrome just for the webcam and Explorer for everything else. I recently upgraded to Windows 7 and had to do the same as before.

[lambadmin]

Bob, it sounds like Win7 security is getting in a way.

Try to run Internet Explorer as an administrator:


find the IE Icon under All Programs
Right mouse button click on it, choose "Run As Administrator"
That did it for me on my new Win7 laptop. Once you install it and it properly registers, you ought to be all set.

http://www.bigwatersedge.com/bwegallery/data/500/run_as_admin.jpg

[CurtyL]

someone needs to take a little tissue paper on the end of their rod and wipe the lense down.

[dsafety]

Thanks for the tip. The "run as administrator" solution solved my problem of not being able to get the Axis software to load. I can now view the camera feed as before.

I suspect that this solution will work for nearly everyone who is experiencing this problem on a PC. I do not know if Macs have a similar method of disabling paranoid security settings. Wayne, did you come up with a fix on your Mac?

Bob

[dahunter1996]

Can some one put a link to the correct Active X Control. I can't find or download it correctly.

[DHSDave]

I downloaded the camera active X add on directly from Axis and disabled my Internet Security, still no luck getting the cam to work on IE Explorer.

My solution was to d/l FireFox Web Browser, works with no problems now.

[SD92101]

Won't open camera on android tablet......help

[Tandem Assassin]

Been able to see the webcam for 5 plus year. Just purchared a new HP slimline with Win-7. Did everything you suggested - turned off security went and enabled all Active X devices - rebooted and still no picture. Played with it for 2 hours and nothing worked.

Whats up?

Nate, reboots are highly recommended... Always.

What OS are you using (Vista, XP, mac OS)?
What browser (Internet Explorer version X, Firefox ver X, etc.)?
Any specific errors that pop up?
When on the webcam page, do you see the frame with nothing in it, some error within it (what error if you do), or no video frame at all (it should be above the "Snap a pic" button)?


Another valid troubleshooting step to try for eveyne with a problem:


Go to the Control Panel
Look for "Axis Media Control" applet.
http://www.bigwatersedge.com/webcam/help/cp.JPG
If it's not there, the Axis Active-X control was definitely never installed - that's your problem.
if it IS there, you should try re-installing it.
Open up "Add-Remove Programs" (on XP, in Vista it's called "Programs and Features"
Find "Axis Media Control Embedded". Uninstall/remove it.
http://www.bigwatersedge.com/webcam/help/addremoveaxis.JPG


You may need to reboot. Always good idea. ;)
Go back to the web cam page - you should be prompted to install Axis ActiveX control again.

[Holy Mackerel]

Won't open camera on android tablet......help

I can't see it on an Android o/s phone either. Anyone else?

[lamb]

Been able to see the webcam for 5 plus year. Just purchared a new HP slimline with Win-7. Did everything you suggested - turned off security went and enabled all Active X devices - rebooted and still no picture. Played with it for 2 hours and nothing worked.

Whats up?

Sorry I missed this.

Try upening up IE as administrator (right mouse button click in the IE shortcut on the start menu, choose Run As Admin). That usually fixes it on Win 7, and you only need to do this once to initialize the webcam control.

Chris, not sure about Android. It works on my iPhone.

Anyone else, does video work on Android?

Heads up: we're looking into options to upgrade the webcam/webserver, stay tuned. ;)

[dwntwnall4u]

I can't see it on an Android o/s phone either. Anyone else?
I cannot see it with android OS.

[Darkstar]

Maybe with the Ice Cream Sandwich OS it will work....otherwise below is the Axis support website about viewing Axis Cams on an Android device...


http://custforum.axis.com/viewtopic.php?t=1640&sid=ebf0008928000bbf490bc24006d81e2c

[salty pirate]

How to fix scrambled video when accessing an Axis camera using a computer with ESET NOD32.

1.Double click on the NOD32 icon in the task bar.
2.Click on Setup
3.Click on Computer
4.Click on Configure…
5.Click on the + to the left of Web and email
6.Click on the + to the left of Web Access Protection
7.Click on HTTP,HTTPS
8.Uncheck Enable HTTP checking
9.Click OK
10.Access the camera that was scrambled before

[Baja_Traveler]

Can anything be done about the dead bugs and dirt in front of the lens?

A bunch of us were willing to give it a blast with a super soaker, but we were warned off by a Mod to not do it.

They know it needs it, it will just take time for them to get down there and deal with it I'm sure...

[bus kid]

Maybe with the Ice Cream Sandwich OS it will work....otherwise below is the Axis support website about viewing Axis Cams on an Android device...


http://custforum.axis.com/viewtopic.php?t=1640&sid=ebf0008928000bbf490bc24006d81e2c


anyone with ICS got this to work? no luck on my tablet or droid 4

Thanks for the reply.

It's not a matter of time. That dead spider has been there since the beginning of fall. It's procrastination, lack of will, or someone just doesn't care.

I took a look at it up close yesterday when I was down there with my fishin' barge. :D It's hard to see, but it appears to be in some kind of housing so the super-soaker idea probably wouldn't work anyway. Too bad, I like a quick fix.

Well, I see a list of webcam sponsors up there on the left. Perhaps they're unaware how badly this reflects on their sponsorship. Time to make them aware?

nice 2nd post. you've been here what, 2 mins now. :stupid:

[rossman]

Maybe with the Ice Cream Sandwich OS it will work....otherwise below is the Axis support website about viewing Axis Cams on an Android device...


http://custforum.axis.com/viewtopic.php?t=1640&sid=ebf0008928000bbf490bc24006d81e2c


It does work on Ice cream sandwich on my Nexus 7. Spider's still there though

[lambadmin]

Please do not clean the camera yourself.
It located on La Jolla Beach and Tennis Club private property - you may get in trouble, and you may get us in trouble so we lose this wonderful privilege of LJBTC letting us have the webcam right at the public launch.

We have placed the request to LJBTC to have the webcam cleaned a while ago. Please be patient.

[Baja_Traveler]

I wish there was a way that you could make it so he can't see the cam at all. :the_finger:

Hell, my job did that for me! - No Active X loaded on these locked down computers! :mad:

(But it works on the new iPhone)... :)

[lambadmin]

It looks like the webcam has been cleaned up! :cheers1:

This thread too.... :)

[Sdspeed]

It looks like the webcam has been cleaned up! :cheers1:

This thread too.... :)


OEX :you_rock:
CAMERA LOOKS GREAT:cheers1:

[William Novotny]

Does anyone know howi can view on Android

[rossman]

Does anyone know howi can view on Android
I could not get it to run on my Android devices until the Ice Cream Sandwich upgrade that I think was version 3.2 but right now it is not working on any of my devices, including my desktop so I think there may be some technical problems some where.

[easyday]

I use google chrome as a browser and it works

[William Novotny]

I use google chrome as a browser and it works

I'll give that a try

[William Novotny]

Nope nothing. How did you do it on Google Chrome the first time you viewed it?

[tacmik]

I could not get it to run on my Android devices until the Ice Cream Sandwich upgrade that I think was version 3.2 but right now it is not working on any of my devices, including my desktop so I think there may be some technical problems some where.
I've lost contact on my computer also.

[jorluivil]

No love using Mozilla

[William Novotny]

No love using Mozilla

I've tried mozilla, chrome, everything. Also tried Internet Explorer 9 on the computer. Never got any prompts

[rossman]

Macheen broke

Sent from my Nexus 7 using Tapatalk

[FISH11]

It must be down I can't see it on my MacBook either and it never has a problem. What a bummer when you can't make it out there it sure is good to get a FIX by tuning in and checking out the scene. Hope it gets fixed soon.

[old_rookie]

Its been down a few days know - I wonder if that digger accidentally swung the arm around and knocked down the camera!

[addicted2sp33d]

I'm using Chrome and IE, and it's not working on either one. :confused:

[driftwood]

Use this one for now. https://scripps.ucsd.edu/piercam

[addicted2sp33d]

Thanks!

Wow - it is beautiful out there right now. :eek:

[driftwood]

Thanks!

Wow - it is beautiful out there right now. :eek:



:iagree:I often like to look at this cam and check out the flag next to the condo just to get an idea of wind speed.

[FISH11]

Thanks for the link. It looks great out there. At least they keep theirs clean, no cobwebs or dirt on the lens. The one at the La Jolla Beach and Tennis Club is located on the balconies just outside a door way and should not be hard to keep clean unless the cobwebs are on the inside of the housing lens. I hope it get fixed soon because it's great seeing the launch area up close.

[driftwood]

Click to full screen to take a closer look at the flag next to the condo. It helps.

[lamb]

We're working on bringing it back up.
Stay tuned

[RobFish]

Thanks Adi. Your efforts are appreciated sir.

[William Novotny]

Thanks Adi. Your efforts are appreciated sir.

X2

[Cbad Mike]

Thanks Adi. Your efforts are appreciated sir.

X3. Sh!t happens..... Glad it even there for our use. Thanks.

[lambadmin]

Thanks guys! :cheers1:

For a few of you that send frustrated emails to admins... :rolleyes: That you don't even get personalized timely response back on...
Somehow always the people that don't even have a BWE account registered... :rolleyes:

Reminder that this is kayak fishing forum. We were fortunate that we were able to bring that webcam up, stoked that's it's been working for years. We're bummed it's down more than you. We're trying to get it back up as soon as possible.

[FISH11]

It's up and running. Thanks to the guys involved for your hard work. It's really nice to be able to check on the progress on the work at the launch. Can't wait till it's clear for our access. Tight Lines

[makobob]

Nice job BWE, this is such an asset to our community. Really good to see it up and running again. Thank you.

Makobob

[lamb]

Baaam! :luxhello:

[addicted2sp33d]

Looks like they are having some flooding issues right now. :confused:

[jorluivil]

Can someone turn the camera to the left a few degrees so that we can catch the launching and landing fails and the fish that were caught:D

[old_rookie]

Baaam! :luxhello:

Thank you sir!

[tacmik]

Thanks guys! :cheers1:

For a few of you that send frustrated emails to admins... :rolleyes: That you don't even get personalized timely response back on...
Somehow always the people that don't even have a BWE account registered... :rolleyes:

Reminder that this is kayak fishing forum. We were fortunate that we were able to bring that webcam up, stoked that's it's been working for years. We're bummed it's down more than you. We're trying to get it back up as soon as possible.
Just remember. When something is free, DON'T BITCH.

[YakDout]

I believe the WebCam is currently down. Thanks for the continued support with this camera, great resource.

[lambadmin]

10-4, Tnx!
We're on it

[lambadmin]

Back in biz

[Bcrossb]

Yea!!!!! It's back up on my iPhone. Thank you so much.

[captnblood34]

THERE IT IS....

[makobob]

GREAT job OEX, this is an important asset for our community, thank you!

[Harry Hill]

all I get is a black screen with the words no video at the bottom, is the video feed up?

[Geno Machino]

Well, my computer worked viewing the old web camera, however I can not get any images on the new web camera on my computer? And it is not a black screen. What gives?

I can view the web cam on my phone though...

Signed,
Confused Kayaker

[Geno Machino]

Never mind...I just hit F5 and WALA there she is. See I told you I am confused.:rolleyes:

Anyways, Thanks OEX!!!:luxhello::luxhello::luxhello:

[wwkf]

Having the same trouble

[kayakfisher]

is the cam down?

[Phishphood]

is the cam down?Works fine for me, and looks nice and calm. Time to go fishing Saturday!

Sent from my SM-G930V using Tapatalk

[Bowhunter]

LJ Cam Down

[lamb]

Yes. :(

It looks like our modem died.

We're coordinating replacement, stay tuned.

[ctfphoto]

Yes. :(

It looks like our modem died.

We're coordinating replacement, stay tuned.

Can you take care of the spider while your at it? :D

[kayakfisherman]

He only takes care of lambs!

[lamb]

:D
USED TO, when I was a broke bum, but I had life.
QUALITY life, full of time on the water!

Yani, could that spider be any good to eat? :D

Please be patient gang - it looks like we'll get it back in business on Monday, fingers crossed. We've got tech coming out on site lined up.

[Old Man in the Sea]

:you_rock::you_rock::you_rock:

[dfroggy54]

Hello is the camera down? Also...last time it wasn’t up, can someone wipe it down?? Haha thanks ahead of time

[Harry Hill]

I'm not getting the webcam, I get the frame and a little icon in the upper left corner that says picture but no video. Never had this problem before then a couple of days ago this started. Any ideas on what is going on?

[Croaker Dave]

I have the same issue

[lambadmin]

We all do.
Camera device itself has been flaking, coming in and out...
It is down / out of the service for good now. :(

I'll put up an announcement.

[lambadmin]

BWE LJ Shores Launch Webcam Retirement announcement:

http://www.bigwatersedge.com/bwevb/showthread.php?t=35511