New Shimano Bristol Bay Bait Tanks

[AYS]

OEX and Anglers Yak Shack is now carrying the Shimano Bristol Bay livewell systems. We have put together our own plumbing and electrical kit for this bait tank that includes a higher quality waterproof toggle switch and added a waterproof fuse holder that is not in the Shimano kit, all for the same price.
Also, for those who desire, a timer switch can easily be added by simply plugging it into the wiring harness. All components are the same Marine Grade that you will find on our KayaTank systems.

The price of our electrical kit is 99.95 (same price as shimano's) or 89.95 with purchase of the livewell from AYS or OEX. The timer switch can be added for only 35.00, saving you 14.95.
Below you can see the quality difference in the Rule switch that Shimano includes and the Heavy duty, PVC Dipped, Waterproof Toggle Switch that is in our kit. Face Plate and Rubber boot are included. This switch retails for 29.95.
http://i217.photobucket.com/albums/cc129/AngersYakShack/123_2372_r1-1.jpg
http://www.anglersyakshack.com/Images/Product/24_ToggleSwitch_lg.gif
The Wiring Harness also includes our Waterproof fuse holder pictured here:
http://www.anglersyakshack.com/Images/Product/07_FuseHolder_lg.gif

[Hobie-Pedaller]

do u have any pics of the tank ?

[AYS]

The tank can be seen here:

http://fish.shimano.com/catalog/fish/products/group_detail.jsp?FOLDER%3C%3Efolder_id=25343743020 53192&ASSORTMENT%3C%3East_id=1408474395181270&bmUID=1194458225139

[esdees]

The tank is working well for me. I just need new batteries and maybe a timer.

[Jim Sammons LJKF]

I put one of the timer switches on mine and I am 50/50 on how I feel about it. I get better battery life and can carry a much smaller battery. The down side is that I can't seem to carry as much bait and have it live.
So for most people that don't need to stuff their bait tank like me, I would say go for it. IF you do really like to carry a lot of bait you might think twice. Now if they will make a switch that is say 1-1 meaning on 50% of the time off 50% I think it would work better. Right now I think it is on for 7 off for 14.
Just for reference I used to put two dozen some times more bait in my tank and not one would die. That is not the case with the timer switch.

[potto]

I don't know the timer switch you are referring to, but the one I had broke. It wasn't waterproof. All it took was one spill and the $35 timer no longer works. Ouch!

What annoys me about the timer is when it starts up after being quiet for a while. I jump in my seat every time. It gets annoying really quick.

I do like the waterproofness of their new switches. I might have to go get one.

[Jim Sammons LJKF]

I have the switch from AYS and it is top notch quality, waterproof and quiet. My only issue is the interval.

[AYS]

The timer switches that you can add for the 35.00 are the ones that we make here at AYS. They are 100% waterproof and carry a 1 year waranty.

[kareem korn]

I'm still using a 5 gal bucket, with $5 in parts and a used bildge pump. Still works great. If I ever loose my battery or need to keep biiiig bait, I use the tube. Seems like kayakers are making it more complicated that it should be.

[thien]

just took a look at the livewell, and overall I like the build. One of the things I am leary of is the inability to regulate the amount of water pumped into the livewell.

[Jim Sammons LJKF]

It does have an adjustable spray head. I leave mine on full blast and it is not an issue though.

[AYS]

Its only a 360 gph pump. As Jim said, leaving it on fully open is not an issue. If you want less water comniog in I suggest a timer, It will do that and save your battery.

[thien]

My bad. I think what I meant to ask is whether you are able to adjust the amount of water the livewell holds, for instance 3 gallons instead of 5?

[AYS]

No, 6 1/4 gallons is it.

[gary sullivan]

Because of where the outlet hole is located you cannot have less than the stated capacity, and besides why wouldn't you want the full capacity?

[thien]

One gallon of water equals 8.33lbs. If I'm scratching for bait and can only manage a couple I like the option of knowing I can cut down on some weight, by not having to fill the whole tank up. All in all, I really like the design and build of this tank. It feels really sturdy, and the quality seems top notch.

[wbrewski]

I don't know the timer switch you are referring to, but the one I had broke. It wasn't waterproof. All it took was one spill and the $35 timer no longer works. Ouch!

What annoys me about the timer is when it starts up after being quiet for a while. I jump in my seat every time. It gets annoying really quick.

I do like the waterproofness of their new switches. I might have to go get one.

Just use a rubber or two around the switch, Mine has been wet a couple of times and no damage. The switch I am talking about. :cheers1:

[potto]

Seems like kayakers are making it more complicated that it should be.

No argument there. If every piece of electronic was salt-waterproof, it would solve my problem. Even if I used the simplest design, it wouldn't prevent salt-water breaking my connections.

AYS waterproof toggle switches are a winner. It looks like a SPST switch. If they had a SPDT, then they could have ON (full), OFF, ON (Timer) .

[wbrewski]

No argument there. If every piece of electronic was salt-waterproof, it would solve my problem. Even if I used the simplest design, it wouldn't prevent salt-water breaking my connections.

AYS waterproof toggle switches are a winner. It looks like a SPST switch. If they had a SPDT, then they could have ON (full), OFF, ON (Timer) .

I still would put a rubber over it.lol

[potto]

Just use a rubber or two around the switch, Mine has been wet a couple of times and no damage. The switch I am talking about. :cheers1:

I read on Cabela's website. A person wrote a "review" on a switch. He said he used the 3500(?) Goop around the switch........Novel idea.

[dgax65]

After I solder the leads to the switch terminals I coat the switch casing with liquid electrical tape. The only thing that I don't cover is the toggle switch and the threads. I usually use a couple of coats and let it dry completely before installing. I put a very thin film of di-electric grease on the switch and threads then install the rubber boot. I'll usually put a thick bead of Marine Goop around the base of the switch to cover the threads. I've had switches last for over 3 years with no sign of corrosion using this method. A little extreme, but it sure does keep the electronics in good working order.

[AYS]

We actually fill the boot on the switch with Dielectric grease. Switches will last a long time. All Wiring is Marine Grade all the way down the the Shrink tube.

[dgax65]

I tried filling the boot with di-electric grease. I found that it would migrate inside the switch and foul the contacts. You could clean the contacts somewhat by cycling the switch numerous times, but it really wasn't an ideal solution.