View Full Version : Truck Rack
Siebler
07-01-2008, 02:58 PM
Truck Rack will fit most pickups. Fully Adjustable in length and width to 8' long and 7' wide. Rack has 2 utility lights mounted on the front (or rear if you put it on that way). Mounts with 8 bolts. Not included but they are cheap from the hardware store(I always recommend Grade 8 however it probably isn't necessary).
Will touch up paint and such for buyer.
125.00 OBO
Located at Anglers Yak Shack or can take home in the College area.
CJ@oeexpress.com
619-518-9174
bajadog
07-02-2008, 04:22 AM
CJ,
Is it a tubular steel rack?:confused:
Marco
Siebler
07-02-2008, 11:28 AM
Yes it is.
Siebler
07-02-2008, 11:35 AM
Heres a picture, not the best to show the rack but you get the idea.
The Thule saddles that are on there can be had with the rack for 150.00 total.
<a href="http://s32.photobucket.com/albums/d49/Siebler/?action=view¤t=IMGP3163.jpg" target="_blank"><img src="http://i32.photobucket.com/albums/d49/Siebler/IMGP3163.jpg" border="0" alt="Photobucket"></a>
Siebler
07-02-2008, 11:36 AM
Also, You dont have to put on the bars that run Length wise. I used it without them for a long time.
Grego
07-07-2008, 08:14 PM
CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts.
Grego
Siebler
07-08-2008, 09:53 AM
Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide.
http://i32.photobucket.com/albums/d49/Siebler/124_2449.jpg
http://i32.photobucket.com/albums/d49/Siebler/124_2448.jpg
Grego
07-08-2008, 01:29 PM
I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.
Siebler
07-08-2008, 01:47 PM
yep 2 holes per mount.
Grego
07-15-2008, 08:26 AM
I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.
Siebler
07-31-2008, 02:55 PM
Still Available. Had a few guys that sounded really interested but flaked.
Ill let it all go for 120.00 (with saddles). Its at my house (college area) right now but I am working at OEX Point Loma and Mission Bay tomorrow.
Grego
07-31-2008, 04:34 PM
Sorry CJ, been busy after coming back, please do sell it if I'm slacking. It's a $65 roundtrip for me so I have to coordinate my travel down there wisely. I might be fishing LJ itomorrow, and if it will be at your shop, I'll swing by to take a look but I'll have a different truck with me.
Siebler
08-02-2008, 10:48 AM
sorry grego, that was in no way directed twords you. You never told me that you would come and get it, just that you were interested.
Unfortunately It is at my house today and Im at Point Loma.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.