Bait tank pump

[steve]

Any suggestions on GPH for a 5 gallon bait tank? Does the pump usually need priming if I install through the scupper hole?

[corazondeloso]

quick stab at the 1st question: 360gph should get er done.

I have no idea on the 2nd question..but as it will most likely be a bilge pump you use, my guess is that the answer is "no". Good luck.

[Iceman]

If the pump itself is above the water line, it will need to be primed. 360 or 500 with either a 6 volt battery or 12 volt with a timer switch.