Kayak Fishing Adventures on Big Water’s Edge - Winter and my Humminbird.....

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)

- General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)

- - Winter and my Humminbird..... (http://www.bigwatersedge.com/bwevb/showthread.php?t=6762)

my hummingbird does the same thing,condensate,bogus readings over the canyon.However i have left the kayak outdoors with the shield on,exposed to rain,heat cool etc...and my hbird still works well .I just put the dielectric grease on once a month. it'll be 3 years old in august.

I wonder if ill still get the funky readings in LJ if i get the xducer for the trident, mounted outside?

have a good one all:reel:

METALBOB :sifone:

metal bob - you guys always have a sweet team in the little league world series!

Quote:

Originally Posted by dtownfan (Post 51756)

metal bob - you guys always have a sweet team in the little league world series!

whoops...updated the info.

Chula was a nice place:luxhello:

Quote:

Originally Posted by dsafety (Post 51715)

I called Humminbird and explained the problem of the unit sometimes only registering 1.2' depth. The technician said that these things can sometimes get confused when the depth changes drastically and quickly such as when we go over the LJ Canyon.

The recommendation was that I set the max depth at something other than Auto. I have not yet tried that solution. They also said that if this procedure did not fix the problem, it was probably a hardware problem which would be covered by the warranty.

I will keep everyone posted on this as the troubleshooting continues.

Bob

Bob

I've had the same problem with erratic depth reading, both deep and shallow. I called Humminbird and they also told me to try changing the depth setting from Auto to a fixed depth. It didn't solve the problem so I sent it in for warranty repair and all they did was a "complementary software update."

My next step is to use use my extended warranty purchased from West Marine, and apply the cost of the ff to upgrade to Lowrance or something else.

Jay

Quote:

Originally Posted by Pescavore1 (Post 51769)

Come to think of it, I got that erratic depth reading whent he unit as halfway dry.

If I had the option for an exchange, thats what I'd do. But If I had to do a fix, I'd try the blow dryer fix with the unit.

/bing

If you are re-using desiccant or it was not in a ziplock or jsut to be safe, bake it first to get all the moisture out of it. No need to add moisture inside the unit. Dielectric grease works great on those Furuno pins too.