PA 12 video
|
weight????? price????? :confused: thanks SoCalCJ
Specifications
Features
|
|
A dealer by my house told me it was 20lbs lighter and no price increase same as big pro angler
|
Happy April 15th.
|
Less raw material but more features even the price out to be the same as the original Pro Angler.
http://i35.photobucket.com/albums/d1...9/IMG_0261.jpg this shows the transducer cover. There is a recess so your trans is in the water with this cover protecting it. http://i35.photobucket.com/albums/d1...9/IMG_0264.jpg No holes to drill with running your FF wiring. One acess here and one under each side board. http://i35.photobucket.com/albums/d1...9/IMG_0265.jpg Far and away the seat is the biggest new feature. Lighter more comfortable and tons of adjustment from reclining to raising to flipping back and leaning against when standing http://i35.photobucket.com/albums/d1...9/IMG_0275.jpg tackle management and the new rectangular hatch. When opened the 2 trays actually raise up and out for easier removal. http://i35.photobucket.com/albums/d1...9/IMG_0268.jpg We were introduced to the PA at the International Dealers meeting last month. Orders were place by all the dealers. Initial shipments are 2 per dealership with followup orders placed. When can you get one? June 1st.........maybe sooner. http://i35.photobucket.com/albums/d1...9/IMG_0269.jpg |
when will you have a demo available?
|
Quote:
I have 8 on order and if they do not all get snatched up with pre orders, I will gladly make one available to demo. http://www.kayakangleronline.com/ind...tures&Itemid=2 |
Andy
I see 2 pulleys? one on each side of the kayak the cord for raising the rudder? is there one for up and one for down on the PA now? or what is the new one for? seat looks great like the center hatch transducer ready is nice and the molded in rear rod holders look like they are better positioned? angling out from the boat? hope you sell thousands of them! |
Quote:
|
Bummer....
|
Yep still want the OG
|
Gotta have it.
|
surprised that nobody spotted the fleet in Mission Bay in March.
http://www.bigwatersedge.com/bwegall...0/IMG_0292.JPG |
Quote:
|
Don,
I see one photo with an up and a down pull cord (prototype), but not what we saw, should be the same as on the PA 14. no second up/down control on this one. http://i35.photobucket.com/albums/d1...9/IMG_0275.jpg |
I noticed the seat is much higher than the larger PA.
The advantage is more torque power. This is going to be a fun ride!!!! |
Andy....what model yak (dune color) is that in the background of the last photo?
http://i35.photobucket.com/albums/d1...9/IMG_0269.jpg |
That white kayak in the background is a class fiberglass version of the Hobie Mirage - the first Miragedrive kayaks produced. It's one of about 70 that were made.
|
Pretty sick boat! Only issue I see is getting in and out of that new chair in the surf. Looks like the seat will have to be in the extra vantage position to get the armrests as much out of the way as possible.
Can't wait until they roll all of those improvements into the PA 14. |
only two ups about it is the lowrance hook ups already there and the seat I think.
Glad I have the 2011 PA |
Quote:
|
|
Quote:
That seat is a riot. Seriously, only hobie would say, "yes, let's make the seat bottom, seat back and seat height fully adjustable! And while we're at it, everybody could use a little adjustable lumbar gadget as well." Good stuff. |
Andy it looks like the rudder up cable is now on both sides to be ambidextrous?
so it is not up / down, but the same as before, just able to use either side of the kayak for control. Looks like the steering handle can be switched to either side of the boat also? |
it also might be 12 lb lighter but it also has 100lb less capacity
|
Quote:
<iframe src="http://www.youtube.com/embed/y34MsIUVWAY" allowfullscreen="" frameborder="0" height="390" width="640"></iframe> |
Quote:
|
Quote:
|
Quote:
looks high (top heavy) for 2-3 ft surf, looks fun though |
Quote:
|
Wife saw it wife wants it Ill buy it for her I look like the good guy for supporting the idea of doing things together wife will burn out or get tired of bugs near the water I get a second kayak :luxhello:
|
What is this "surf" thing of which you speak? Nothing like that here in Utah...LOL!
I bought my PA14 exactly 17 days ago. If I had had the option, I think I would have still gone with the 14. For one thing, the shorter length would make it harder to load atop my Durango. By the time I had the bow up on the rack, the shorter 'yak would be almost vertical. Plus, I'd lose two rod holders, and the four in the 12 would be shorter, to boot. The new seat may or may not be better; those arm rests might be more in the way than I'd like. The handles seem too far back to mount anything on, or even use as fish measurers. Then there's the fact that I'm not a Lowrance guy. One thing I DO like is the new paddle holder system on the left handle. I'd LOVE that on my 14. |
I don't understand why they go with Lowrance when you have to pay extra for everything and there mapping for San Diego is crap.
|
coming in at TWO feet shorter than the fourteen ... is it still the same price ?
and yes why limit the FF to a lowrance why not make it so other units could be used |
Yea, IF I got the shorter one, First thing I'd be trying to figure out is how to modify the Lowrance transducer mount and change it to fit the Garmin 440 unit I want. I've never liked Lowrance, and that will not change any time soon.
What I do like though is the fact that the seat is easily removable in the water for more standing room. That falls right into my bowfishing plans. |
WOW!!!
|
The seat looked mighty comfortable, but how am I gonna seat sideway to get bait from my bait tank ?
The center hatch looked pretty "user friendly", much better than the old bungee style. I have the Humminbird FF already... not fit this one. Should have a "universal FF " instead. Got my 2012 PA, and after I install a seat slider next week, I will be happy. No regret ! :) |
The external wetmount for the 'ducer is awesome :luxhello: I also like that the steering that can be switched from one side to another. I got used to the steering on one side and make it work, but I always thought it should go on the other side.
I'm gonna have to take one for a test paddle.... :cool: |
To anyone looking to upgrade hit me up I'll take your OLD PRO ANGLER off your hands
|
All times are GMT -8. The time now is 04:40 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.