Kayak Fishing Adventures on Big Water’s Edge - When to replace Mirage Drive Turbo Fins

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)

- General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)

- - When to replace Mirage Drive Turbo Fins (http://www.bigwatersedge.com/bwevb/showthread.php?t=26939)

Fomen

09-04-2015 06:48 AM

When to replace Mirage Drive Turbo Fins

I recently bought a used Hobie PA12 with the turbo mirage fins. The trailing edge of the fins looks a little tired. It's not nice and straight. It look a little wavy and stretched out. Is this normal? At what point do they lose their structural integrity and need replacement? Just curious.

JohnMckroidJr

09-04-2015 06:55 AM

Pictures worth a thousand words. Sounds like it has a bent mast, probably needs the mast replaced.

Iceman

09-04-2015 07:24 AM

I would not worry about replacing unless they split and expose the mast.

Fomen

09-04-2015 07:33 AM

Mast isn't bent, and fins aren't torn. Just look a little worn- that's all. I just didn't know if the stretching of the material negatively effected performance on the water. I will snap a pic and post it up. Wont be until this weekend though. Then you guys can tell me what you think.

All times are GMT -8. The time now is 05:23 AM.