Kayak Fishing Adventures on Big Water’s Edge

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)
-   General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)
-   -   Fish Jaw Restoration (http://www.bigwatersedge.com/bwevb/showthread.php?t=29768)

tunaseeker 08-10-2016 09:23 PM

Fish Jaw Restoration
 
I got asked to help out with a cool jaw restoration....

YouTube Vid here....https://www.youtube.com/watch?v=j9QNKEWqp7Y

World Record IGFA Broomtail Grouper... Music is a little dramatic but well deserved.....

PapaDave 08-11-2016 06:59 AM

So what is the procedure for preserving the jaws? I see denatured alcohol, skull paste and beer, but how does that go together?

onetriphudson 08-11-2016 07:08 AM

Thats awesome!

MrPukaShell 08-11-2016 01:32 PM

Very cool indeed. Thanks for taking the time to share.

SDROB 08-11-2016 03:13 PM

Top notch! Very Cool...:cheers1:

Dannowar 08-11-2016 03:22 PM

Quote:

Originally Posted by PapaDave (Post 267175)
So what is the procedure for preserving the jaws? I see denatured alcohol, skull paste and beer, but how does that go together?



There's a few ways to do it. I usually boil the jaw till the flesh gets lose and carefully remove it. These teeth weren't in there very securely so I had a hell of a time. Then I soaked mine in half water half hydrogen peroxide. Let em dry and hot glued em together. You can actually see at the top of the jaw where my spear shaft broke off the vertical bone hehe.


Not a monster like that broom tail but you can see the subtle differences in jaw structure.


67 pound Gulfie

http://img.photobucket.com/albums/v1...pspw0cvd4z.jpg

tunaseeker 08-11-2016 07:19 PM

Ok boys & girls ....
First I am not a professional taxidermist! I dabble a little...
As you know there are many ways to skin a cat or fish....
so this is my method
The best way is with Dermisted Beetles! Hands down. But I have never done that yet. That will be my next project.

1. Drink IPAs helps with the smell :)
2. Boil the fish jaw, Parboil, but not too long as you will loose some teeth depending on the fish? If you have small thin teeth yep you will loose them. If they are like shark teeth or Sheephead no problemo
3. Then get as much meat off as you can. Boil too long an the jaw will fall apart into as many as 6 pieces potentially. Keeping the connective tissue can help you in the end. But too much it can look funky.

4. I then soaked it in water for a day, you can mix with peroxide..
5. More meat removal
6. Then soaked in peroxide 3% for another day
7. More meat removal but teeth are getting loose...
8. Drink more beer!
9. Then I put into ethanol as it will fix the remaining connective tissue and make it firm and white.
10. That's another day or so.
11. Dry it out and apply the skull paste which is 40% hydrogen peroxide with sulfate powder.. Only beer here is for drinking! You mix the two and it will makes a paste, use a paint brush to apply
12. Leave on for 24 hours and then rinse off with warm water. works very well!
13. Repeat if yellow..
15. Paint on an Elmers Glue and hot water mix 1:1 to secure any loose teeth. I added some Isopropyl alcohol too.
16. This should be done now but add a spray clear coat gloss to make it shine..

I have also just soaked it in hydrogen peroxide before for about a week and that worked well too....

It really depends on the teeth....

Hopefully this helps you all a little....

Getting it fully pearl white with no yellow is the ultimate goal! Don't use bleach as the ph will mess up the bone structure and make it brittle and fall apart as it has a high ph.

If you want to use bleach it will have to be PH adjusted with vinegar...
but then you need ph strips too.. But caution as this can produce chlorine gas...

So the easiest way is quick boil, remove meat, soak in 3% hydrogen peroxide 2 days, if you can get a higher percentage the better up to 20%40%, remove more meat, peroxide again not for long as the bones get loose. Dry out and clear coat if white.....

Again this is just my method and there are many out there but nothing definitive that I found. The key components you have to use
-Skull Paste 40% Hydrogen Peroxide with sulfates
-Ethanol
-Elmers glue mix...

Cheers
Todd:cheers1:

PapaDave 08-12-2016 06:31 AM

Thanks for the tips.

Cedros Tackle 08-12-2016 11:55 AM

Wow Todd!! That is an awesome video! Super appreciate all the hard work. I hope you will take me up on my offer to come down to the island with Kevin and I. Well deserved and I would be honored to have you as a guest at the Cedros house. :cheers1:

tunaseeker 08-12-2016 12:13 PM

That's an amazing offer and I will gladly take you up on that!

Cheers!
:cheers1:
Todd

Mr_Fixit 08-12-2016 12:21 PM

Oh this thread is priceless! I am going to get no end of entertainment out of doing this! The beer certainly helps with the entertainment, but there are other aspects that are going to make me laugh for many years....

My girlfriend is a vegetarian. She gets a little upset if I bring a fish home. She wants me to release them all, and even dislikes that I catch them in the first place.

Now.... to have a spectacular trophy sitting there in the house grinning at the vegetarian on a daily basis?! Oh my... this is going to be funny!

Probably not getting laid for a LONG time... but it will be funny!

tunaseeker 08-12-2016 12:50 PM

I was actually laughing out loud in my cubicle!

Croaker Dave 08-16-2016 04:17 PM

1 Attachment(s)
Here's a halibut that I did a while back

tunaseeker 08-16-2016 07:53 PM

Nicely done!


All times are GMT -8. The time now is 07:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.