Kayak Fishing Adventures on Big Water’s Edge

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)
-   General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)
-   -   v1 drive help (http://www.bigwatersedge.com/bwevb/showthread.php?t=11984)

salty pirate 11-22-2011 08:41 AM

v1 drive help
 
I bought a used 08 outback about a year ago. why do the chain cable's keep breaking on me. Im about to buy 3rd chain as its hanging on by a thread. this chain is only 2 month's old. is it defective? or am I doing somthing wrong. the drive gets washed off, lubed and checked after every use.
http://www.hobiecat.com/forums/viewt...p?f=60&t=12572
love the yak but dont want to keep buying chains.

Iceman 11-22-2011 08:52 AM

Quote:

Next, squeeze your chain cables in the same manner. The front should have a little give (again, about 1/8 inch), and the rear, slightly more (3/16 inch). These measurements are more critical if you have the stainless sprocket -- too loose and you can skip a cog on the sprocket; less critical with plastic sprockets.
Are you over tightening?

Which cable is breaking?

salty pirate 11-22-2011 01:04 PM

thanks for the help. the back one thats got 7-8 trips on it is about to go. just checked and they are to tight not by much though. would that be the cause? hobie parts discount for black friday? :)


All times are GMT -8. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.