Cracked Hobie Bait Tank
 

So I recently just found out that a buddy of mine has a cracked bait tank. Is he better off buying a new one, or can these be molded back to place?

Where and how bad is the crack? Can plastic weld with a soldering iron. If the crack is bad he may need additional material

Depends on the crack but a slow leak is fine, just drill a hole at each end to stop the crack from progressing.

Ok thanks gentlemen, I will see how bad the damage is tonight

Mine cracked at the seam in the the front. Marine Goop inside and outside along the seam fixed it right up.

That's exactly where it's at

Drill a hole at both ends. Gorilla tape will do the job. Save your money.