![]() |
Battery question
I have been using the standard 12v 7amp battery for my cuda 168. Bought a lighter weight 12v 3.5 amp battery. Tried it out today lost signal when I was deeper than 70 feet. Worked fine in shallow water. Any ideas?
|
What are the power requirements on your Eagle Cuda 168 ??
How many watts--Peak to Peak ?? That 3.5 amp battery seems low, I don't think it will last very long. I would stay with a 7.5 amp minimum upwards to a 12V 10 amp. --------------------- FWIW for comparison I use a PiranaMax 215 Model that is rated 800 watts peak to peak. -I run the FF on 8 AA rechargeable batteries and it works perfectly. I can use it several days of fishing before I need a recharge. |
12 volts is 12 volts, should not be the battery that is creating the problem. That 3.5 should run the 168 for as long as 12-15 hours.
If those are 2200 mAh double A's you are using about a 1.75 Amp Set up that is only 9.6 volts, most F/F run on 8 volts minimum. |
All times are GMT -8. The time now is 03:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.