Kayak Fishing Adventures on Big Water’s Edge - View Single Post

TJones · 03-24-2014, 06:50 PM

Most important thing is can you see your jig or sibiki ? If you can , then you can start adjusting the sensitivity . There is nothing wrong with leaving auto sensitivity enabled . You can still make minor adjustments as needed .As I mentioned turn surface clarity to low and that will clear up some of the junk up top which is normal . If you choose the proper fishing mode , the ping speed will be adjusted , and you should not have to mess with it . One other important thing is keep adjusting the depth as needed, the deeper you go , adjust as needed . This will keep the screen from compressing data . Make sure you are at the proper zoom with the plus / minus key after correcting depth .

03-24-2014, 06:50 PM	#12
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	Nobody mentioned dropping chicken bone over the rail Most important thing is can you see your jig or sibiki ? If you can , then you can start adjusting the sensitivity . There is nothing wrong with leaving auto sensitivity enabled . You can still make minor adjustments as needed .As I mentioned turn surface clarity to low and that will clear up some of the junk up top which is normal . If you choose the proper fishing mode , the ping speed will be adjusted , and you should not have to mess with it . One other important thing is keep adjusting the depth as needed, the deeper you go , adjust as needed . This will keep the screen from compressing data . Make sure you are at the proper zoom with the plus / minus key after correcting depth .