Quote:
Originally Posted by driftwood
Good Job Tony! your Baja video was really good stuff. I would also replace both sprockets and shaft on your drive.
I noticed there is no space between the top of your sprockets and the bottom of the spline.
Notice how much space there is between the spline and sprockets in the picture below. Your sprockets are really worn-out. I would not tighten the chains any more.
 |
Good observation, it looks like there is no space inbetween but its just the angle of the picture, there's space. But in any case your right, i havent replaced them yet and i should...i replaced just about everything else except the spine...