Kayak Fishing Adventures on Big Water’s Edge - View Single Post - Help with HDS-5 PA 12 install

MissileTM · 05-27-2014, 03:41 PM

Use a 1" spade bit and drill a second hole and use another Hobie grommet for the second wire. You should have one connector coming from the xducer and another from the battery. All 3 wires will not fit any of the hobie grommets.

05-27-2014, 03:41 PM	#11
MissileTM Member Join Date: Aug 2013 Posts: 90	Use a 1" spade bit and drill a second hole and use another Hobie grommet for the second wire. You should have one connector coming from the xducer and another from the battery. All 3 wires will not fit any of the hobie grommets.