|
I have had the main axle shaft walk on me twice. Luckily, I discovered it before it move enough to prevent removing the mirage drive out of the well. Need to check all the allen set screws periodically -- if they loosen the shafts can walk. Should be able to gently tap the shaft back into position. A spare mirage will fit in the forward hatch of the PA14, but to make it fit, need to leave out the forward liner. For safety, better have the forward liner in place for flood control and prevention. The mirage can limp in as you learned, I was surprised that a broken mast only reduced speed by 1/3. I'll take a Hobie over a paddle kayak any day. The Hobie paddle needs an extension, let us know if you find a good extension.
|