Quote:
Originally Posted by dgax65
That's right; Lexan. Why use a box that you find in your parts bin when you can spend two days building the damn thing.
|
Now that's the spirit of innovation. Two days in the shop gets you out of a lot of honey-dos.
I like the idea of the well being clear so you can check the water level. The last time I went out, my Humminbird Matrix 12 started acting up. I ended up having to shimmy up to the bow, pull out my trusty Swiss Army Knife and pop the top off of my unit made of ABS to make sure that it was still full of water. (It was.) Having a well made of some clear material would have made that step unnecessary. I wonder if there is a source for clear plastic pipe in 3 or 4 inch diameters?
A couple observations. It has been a while since I worked with Lexan but if memory serves, this material can be easily welded using acetone. Assuming the weld works, (you could goop the corners as well), that would eliminate the need for all the metal braces. Of course then the thing would not look as cool.
Also, I like the portability that being able to detach the transducer from the well using a rubber cap provides. Does your design offer a way to do this?
Finally, I do believe that the Lowrance transducer can be made to fit into a 4" piece of ABS pipe. The 3" one that works for Humminbird is too small. Cali Hookup and I collaborated on a version of my design to fit his Lowrance unit. We got it to work although it just barely fit.
Nice work Doug.
Bob