Quote:
Originally Posted by GregAndrew
Looks like the high chirp is getting some interference. Might try cycling off any other electronics on board, and checking your transducer cable and pins. The crack in the screen could be troublesome too? If your transducer is not directly in the water, you might want to check for bubbles (although the downscan does not appear bad). Make sure you have the right transducer selected in the setting also. Is the "4X" on your unit scroll speed? If so, I would turn that down to normal.
|
Ya switched high chirp to 200 and zoomed out so much better already more clear.
Quote:
Originally Posted by YakDout
The 4x appears to be the amount of zoom. Agree with the rest.
|
Dont know how to turn down sensitivity but 200 seems to correctly portray what's below thanks to both of you for all the suggestions!
Sent from my SM-G965U using Tapatalk