View Single Post
Old 09-19-2017, 09:06 AM   #55
chris138
donkey roper
 
chris138's Avatar
 
Join Date: Apr 2009
Location: Pacific Beach
Posts: 968
Quote:
Originally Posted by Johnny Hirn View Post
I am looking at putting my lowrance elite 4x chirp transducer on the lowrance scupper plug mount for better clarity, however, as of now it is currently installed with the goop method. What is the best way of removing the transducer safely.
Tight lines,
Johnny.
Johnny,

Shouldn't be too tough... if you used the actual brand "goop" you might have a chance to get it off clean. The key is gonna be not to put big scratches and abrasions on the "business end" of the transducer. That being said, you will probably have to cut it out if you cant just pull it off. When I removed mine back in the day, i got lucky and it all kinda peeled off as one piece. Maybe use some rubbing alcohol or some thing to clean the adhesive off, but i wouldn't get too crazy with the industrial solvents as you might degrade the plastic on the 'ducer, or on your hull. You want to get that thing as clean as possible.

Worst case scenario buy a transducer on ebay. everything else will work fine with the new transducer as long as you get the right one.
chris138 is offline   Reply With Quote