[JohnMckroidJr]

Originally Posted by monstahfish

The original plate worked pretty well if you left a 3/8 gap per the instructions between the bottom of the ducer and the plate. Hobie later added vents in the face of the plate to increase flushing. https://www.google.com/url?sa=i&url=...AAAAAdAAAAABAD

The original plate works great if you have a smaller transducer, but if the length of the transducer forces one to mount it flush with the plate to keep it horizontal to the bottom, the cut out is a good solution.

Upgrading to the Guardian system is an even better solution.