Quote:
Originally Posted by bus kid
Nice!
|
Quote:
Originally Posted by OutdoorAdvntr
i like the idea of front pole holder extender... i will try to make one but not for the pole but for camera mount extending towards the front to have a wide angle shot... i will use the concept... thanks for sharing!
|
Thanks! If you are following the concept, I believe I cut the arms at 15 degrees, and 4 inches in length. The backbone is 25 inches, with the first arm epoxied at the 24 inch mark, with 4 inch intervals. Start from the bottom up, that way the top has a slightly larger area for you to wall mount vs the bottom (see pictures in first post). I used drywall anchors, long screws, and a washer to keep the carbon fiber from caving in at the screw head.