Quote:
Originally Posted by ProfessorLongArms
I went for exactly what you’re talking about but I did not mount the motor inside so that it doesn’t drain if the battery dies and the motor stops running. I have heard that having the motor to high up from the waterline can cause priming issues, but with the little Hobie tip on the bottom it doesn’t seem to be a problem. You definitely want to be a couple of inches below the bottom of the hull. My first try I was just below the hull and it didn’t pick up well at all.
|
Can be capped or the pump itself is threaded . Cap can be purchased at Home Depot. With cap installed the tank can be filled manually . I also use the tank as a giant storage when launching and landing.