Upgrades for HOBIE Mirage Drives - Kayak Fishing Adventures on Big Water’s Edge

mg2969 · 03-15-2008, 02:54 PM

Great writeup, very informative and detailed.
However I would add that once you've backed out the mast holding screw /bolt, it doesn't seem to ever be as tight.
I would
* add some lock tight to the procedure,
* make the hex wrench that fixes it part of mirage drive owners on the water emergency kit,
* and give a quick check to the screws/bolts before you launch.

Ask me how I know

03-15-2008, 02:54 PM	#2
mg2969 Member Join Date: Mar 2007 Location: Long Beach / Lakewood Posts: 85	Great writeup, very informative and detailed. However I would add that once you've backed out the mast holding screw /bolt, it doesn't seem to ever be as tight. I would * add some lock tight to the procedure, * make the hex wrench that fixes it part of mirage drive owners on the water emergency kit, * and give a quick check to the screws/bolts before you launch. Ask me how I know __________________ Hobie Mirage Revolution Prowler 13 - Look ma no hands

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode