New and need advice - Kayak Fishing Adventures on Big Water’s Edge

PescadorPete · 07-12-2016, 01:13 PM

Hi Andy, if you have a Hobie it's pretty straight forward. Attach the transducer to the transom mount bracket. Then a couple of long bolts and a reel clamp of the right size. Clamp it to the sail mast downtube below decks. A thin coat of putty so there is no air gap between the transducer and hull.

I have moved mine to under the seat so it is out of the way. This method doesn't depend on having the Hobie downtube. If you need to see this, I can see if I can get under there and take a picture. It requires a little bit of MacGyver finesse.

I have had no trouble with either method because they don't depend on the putty to hold the transducer in place.

~~~Pete~~~

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-12-2016, 01:13 PM	#12
PescadorPete Senior Member Join Date: Mar 2005 Location: Leucadia, CA Posts: 261	Hi Andy, if you have a Hobie it's pretty straight forward. Attach the transducer to the transom mount bracket. Then a couple of long bolts and a reel clamp of the right size. Clamp it to the sail mast downtube below decks. A thin coat of putty so there is no air gap between the transducer and hull. I have moved mine to under the seat so it is out of the way. This method doesn't depend on having the Hobie downtube. If you need to see this, I can see if I can get under there and take a picture. It requires a little bit of MacGyver finesse. I have had no trouble with either method because they don't depend on the putty to hold the transducer in place. ~~~Pete~~~