Hobie bait tank priming issue - Kayak Fishing Adventures on Big Water’s Edge

FISH11 · 06-04-2017, 02:32 PM

Besides checking the battery voltage, if its been used a few times. Take the upper half of the pump out by pressing the red tab and turning the body of the pump 1/2 turn counter clock wise. Once you have it appart check to see if there's eel grass on the shaft. I had that happen, the impeller looked good but the shaft had a bunch and it was not visible with the pump assembled. The resistance on the shaft slowed it down.

06-04-2017, 02:32 PM	#14
FISH11 Member Join Date: Aug 2013 Location: Pine Valley when not fishing La Jolla Posts: 2,643	Besides checking the battery voltage, if its been used a few times. Take the upper half of the pump out by pressing the red tab and turning the body of the pump 1/2 turn counter clock wise. Once you have it appart check to see if there's eel grass on the shaft. I had that happen, the impeller looked good but the shaft had a bunch and it was not visible with the pump assembled. The resistance on the shaft slowed it down. __________________ MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids )

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode