Lowrance Hook2 Triple Shot

[SoCalEDC]

Originally Posted by dgarland10

I am a FF novice, and have learned a lot here including a bunch of great info from Chris B. My Hook2 triple shot often does not display depth. If I turn it off and back on sometimes it displays then or will display for a few then stop. Any ideas on how to remedy this?

I had a Hook2 (5") and had the same issue. It was due to depth. The unit itself is rated to about 600 feet in freshwater , using the 200khz frequency). In saltwater that's probably more like 400 based on the bottom composition.

I would frequently lose depth reading when going over canyons I think the deepest I ever read was about 450 in saltwater with that unit, but usually it would start going blank around 350'. You can probably get a lower frequency xducer for it but you will have to reach out to lowrance and see what will work.

Btw I was using the splitshot/HDI (200khz xducer) not the triple shot.