|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
01-30-2010, 06:48 AM | #11 |
Olivenhain Bob
Join Date: May 2008
Location: Olivenhain, CA
Posts: 1,121
|
Hi Jeff,
"In theory", you should get better performance with the wet mount. I am not aware of anyone actually doing before and after tests but it makes sense if you can get rid of the bubbles that commonly form in Goop installations, things should work better. As for how your existing transducer is currently mounted, if your transducer is glued in place with some clear silicon, it is probably a Goop installation. You can remove the transducer by carefully sliding a knife or other sharp tool under the unit until it eventually breaks away from the hull. You will then have to shave away all the Goop, eliminating any bubbles that may have formed. As for where the transducer should be mounted, I doubt that it makes much of a difference in a kayak but I prefer having it mounted near the bow so the fish finder will display what I am approaching rather than what I have already passed. If you have more questions about the wet transducer installation, visit this thread where it is discussed is more detail. http://www.bigwatersedge.com/bwevb/s...ead.php?t=6508 Bob |
Tags |
kayak fishing inovations, kayak rigging ideas |
|
|