Help w/ Lowrance - Kayak Fishing Adventures on Big Water’s Edge

GregAndrew · 12-09-2011, 09:18 PM

Tom:
Noise reduction only if you are experiencing interference from your other electronics. Turn your sensitivity up until most of the screen is full, then back off 4-10 notches. Auto sensitivity is good until you have a lot of time on your hands to fiddle with your unit. Set the color palette to the selection that your eye picks up the "Hard" colors best. Colorline will be something near what the auto setting is (too high or low and you will not see differences in color for hard and soft returns). Surface clarity - Off. And select the transducer you are using from the settings.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-09-2011, 09:18 PM	#1
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	Tom: Noise reduction only if you are experiencing interference from your other electronics. Turn your sensitivity up until most of the screen is full, then back off 4-10 notches. Auto sensitivity is good until you have a lot of time on your hands to fiddle with your unit. Set the color palette to the selection that your eye picks up the "Hard" colors best. Colorline will be something near what the auto setting is (too high or low and you will not see differences in color for hard and soft returns). Surface clarity - Off. And select the transducer you are using from the settings.