They always said i should share...(Trailer Designs) - Kayak Fishing Adventures on Big Water’s Edge

jbaker · 01-20-2012, 09:27 PM

I would start off with an extra tall enclosed cargo trailer, 8' inside height. then look for one with dual swinging rear doors, might have to custom order as most trailers that are 20' have ramp doors. building the up rights out of aluminum and making the arms adjustable / removable. Maybe make a front bench all the way across the front with the tool box under it and possibly cabinets above. And finally depending on whats towing it, where it will be going and the trailer suspension, flipping the axles and putting a wider tires on it. But then again it would be a lot cheaper to build an open trailer just my .02 tho

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-20-2012, 09:27 PM	#3
jbaker Member Join Date: Sep 2008 Location: Redding Ca Posts: 85	I would start off with an extra tall enclosed cargo trailer, 8' inside height. then look for one with dual swinging rear doors, might have to custom order as most trailers that are 20' have ramp doors. building the up rights out of aluminum and making the arms adjustable / removable. Maybe make a front bench all the way across the front with the tool box under it and possibly cabinets above. And finally depending on whats towing it, where it will be going and the trailer suspension, flipping the axles and putting a wider tires on it. But then again it would be a lot cheaper to build an open trailer just my .02 tho