Scupper hole mount transducer? - Kayak Fishing Adventures on Big Water’s Edge

sasha · 01-13-2013, 09:13 AM

I used a valcro to hold the transducer under the kayak. Ran the wires thru the scraper. There is maybe a 1/16 or 1/8of in inch of it sticking out from the channel. Not even close to make contact with the sand on landing. Real easy to take off and put back on. Spend all day on the water with no problems what so ever.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-13-2013, 09:13 AM	#7
sasha Senior Member Join Date: Sep 2010 Posts: 275	I used a valcro to hold the transducer under the kayak. Ran the wires thru the scraper. There is maybe a 1/16 or 1/8of in inch of it sticking out from the channel. Not even close to make contact with the sand on landing. Real easy to take off and put back on. Spend all day on the water with no problems what so ever.