Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-04-2013, 09:29 AM   #3
MrM
Senior Member
 
MrM's Avatar
 
Join Date: May 2012
Location: The Matrix
Posts: 643
I smother all my connections in dielectric grease. My kayak is stored outside, too. (in the shade, on saw horses, under a tarp) Dielectric grease can be found at any hardware store. I think Andy carries it in SSB, I would image they do down south too. WD-40 works well, but can aide in the rusting process if you leave too much on there.

If you are good with a soldering iron, I say fix the plug and move on. No need to buy a whole new ducer or head unit if you can buy a plug and fix the issue yourself! Get her fixed, and back out there!


Edit- Or take a free ducer from YakDout. Nice. ^^^^
__________________
-Kevin
MrM is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.