HDS Gen 2 need help

[momo fish]

Nice. That's great info I have not been able to find yet. Thanks for help


Sent from my iPhone using Tapatalk

[Mike scales]

Originally Posted by momo fish

Nice. That's great info I have not been able to find yet. Thanks for help


Sent from my iPhone using Tapatalk

X2

[Bert Vega]

I need to learn how to read mine. I have only figured out to use the GPS. Sort of

[TJones]

Most important thing is can you see your jig or sibiki ? If you can , then you can start adjusting the sensitivity . There is nothing wrong with leaving auto sensitivity enabled . You can still make minor adjustments as needed .As I mentioned turn surface clarity to low and that will clear up some of the junk up top which is normal . If you choose the proper fishing mode , the ping speed will be adjusted , and you should not have to mess with it . One other important thing is keep adjusting the depth as needed, the deeper you go , adjust as needed . This will keep the screen from compressing data . Make sure you are at the proper zoom with the plus / minus key after correcting depth .

[jorluivil]

Originally Posted by TJones

Most important thing is can you see your jig or sibiki ? If you can , then you can start adjusting the sensitivity

Are you saying that its bad to be able to see your sabiki or jig? Just want to make sure I understand your statement.

[ful-rac]

This ended up being solid squid from top to bottom

[TJones]

Something might be wrong ? When all else fails , read the manual . Not all sections will apply to a kayak , but at least start with the sonar section . It sounds like you guys did not even open the cover.