Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

igotpron · 09-03-2015, 04:13 PM

Ahh yes looks familiar. They had 24" and 36" models. Was the 24 to big?

yak-fishing-socal · 09-09-2015, 08:19 AM

Quote:

Originally Posted by igotpron

Ahh yes looks familiar. They had 24" and 36" models. Was the 24 to big?

Yea had to cut it down and it still didn't fit properly because of the hatch cover

sent from my thumbs on my G4

WARRIORMIKE · 09-11-2015, 08:30 AM

I added some rail padding that is more commonly used for Baseball Fields to my trailer extender

Flat padding $ 9.95 per foot - The "t" bar is about 3ft across

Comes in Flat pad or Round pad at 2-1/2 in diameter

The flat pad is what I currently have on it. Just need to tie it down with zip ties . The round pad is what I have in my hands

The round padding is $12 per foot

Graphics are extra

I will be bringing these to the JAL event if interested

Mike

DanaPT · 09-11-2015, 03:35 PM

So had real miserable cart wheels. the kayak would slip off, I felt like an ox plowing a field pulling across the sand.

This was my second set of wheels of this type. Turns out I found a "never flat" all purpose wheel at home depot. Have to buy a set of 4 approx $60.

the wheels have 2 bearings in each and are 5/8s. so a 5/8 lag bolt on each side almost exactly fits perfect into the old axle. With a bit of electric tape at a couple of spots for a super snug fit, I hammered them into the old axle and they are snug and spin really well. I may try to drill a tap screw or something. we'll see.

A few outings so far. a world of difference vs. what I had. Let's see if it holds up longer than a year.

MITCHELL · 11-29-2015, 02:15 AM

I have to get pictures....

MITCHELL · 11-30-2015, 03:28 AM

MITCHELL · 11-30-2015, 04:05 AM

I only use my cell phone for downloads and pictures aren't unloading stay tuned

for more great stuff I'm in this rig for under $900 for everything

11-29-2015, 02:15 AM	#5
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,289	Stay tuned for my 4 innovation....or was it 5 or 6 will see how it goes I have to get pictures.... __________________ Duke Mitchell Last edited by MITCHELL; 11-29-2015 at 04:32 AM.

11-30-2015, 04:05 AM	#7
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,289	Seems to be a cookies problem I only use my cell phone for downloads and pictures aren't unloading stay tuned for more great stuff I'm in this rig for under $900 for everything __________________ Duke Mitchell Last edited by MITCHELL; 11-30-2015 at 04:52 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-03-2015, 04:13 PM	#1
igotpron Xcoastie Join Date: Jun 2013 Location: Westminster Posts: 285	Ahh yes looks familiar. They had 24" and 36" models. Was the 24 to big?

09-11-2015, 08:30 AM	#3
WARRIORMIKE Senior Member Join Date: Apr 2015 Posts: 303	I added some rail padding that is more commonly used for Baseball Fields to my trailer extender Flat padding $ 9.95 per foot - The "t" bar is about 3ft across Comes in Flat pad or Round pad at 2-1/2 in diameter The flat pad is what I currently have on it. Just need to tie it down with zip ties . The round pad is what I have in my hands The round padding is $12 per foot Graphics are extra I will be bringing these to the JAL event if interested Mike