Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 08-25-2018, 09:46 AM   #1
hiramehunter
Senior Member
 
hiramehunter's Avatar
 
Join Date: Nov 2011
Location: Near Palos Verdes
Posts: 198
Any updates on the compass?
hiramehunter is offline   Reply With Quote
Old 08-25-2018, 01:39 PM   #2
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
The Compass has the same price tag as 2018, they have added a sail mast receptacle and have made a deeper side handles as well as adding papaya for this price of $1949 as well. The Compass will also be offered in Camo with the non-ARC MD180 Drive with Turbo Fins for $2299.


__________________
Iceman is offline   Reply With Quote
Old 08-26-2018, 12:41 PM   #3
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
hoping to pick up my first 2019s day after Labor Day Sept 4th........unless they allow me to pick up this coming week. Already sold a couple outbacks sight unseen!
__________________
Iceman is offline   Reply With Quote
Old 08-27-2018, 09:42 AM   #4
goldenglory18
Senior Member
 
goldenglory18's Avatar
 
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
I'm so stoked on the new Outback but my god in heaven, I must have completely forgotten how expensive Hobies are cause the sticker shock is REAL.

Last edited by goldenglory18; 08-29-2018 at 12:58 PM.
goldenglory18 is offline   Reply With Quote
Old 08-27-2018, 05:41 PM   #5
deptrai
Member
 
Join Date: May 2014
Posts: 54
How does the $2,799 price and 85 pound weight compare to the previous model?

Any photos of the added keel?

Dave
deptrai is offline   Reply With Quote
Old 08-28-2018, 08:39 AM   #6
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
No photos but believe I saw it in the promo video. Lots of info here.



https://www.hobie.com/kayaks/mirage-outback/
__________________
Iceman is offline   Reply With Quote
Old 08-28-2018, 08:45 AM   #7
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
Here it is, IMO this change is HUGE with the rudder tucked under. They also include this loading device to keep the hull from sliding and scratching as you load it


__________________
Iceman is offline   Reply With Quote
Old 09-13-2018, 11:44 AM   #8
absentx
Member
 
Join Date: Aug 2012
Posts: 47
Aww man this is just too much! I would say I just reached "peak" rigging awesomeness on my 2015 Outback this spring after three seasons of really working on it.

I hate to move on from it but this new one looks pretty amazing.

A few concerns though:
  • I use mine as a fishing/expedition kayak, sometimes spending two to eight days with it camping.
  • The lack of a rear storage hatch and the shrinking of the front hatch does concern me because I basically fill my hull full of camping gear and everything I need.

I am wondering if that nice round molding in the rear tray is the perfect spot to cut into and put your own eight inch round hatch in? The problem however would be if there is even ample room below it to make much sense for storage...but any little bit helps.

I also installed some rod holders and other items through the hull on the rear on my 2015 and I could access those fittings to tighten down or do maintenance on from the rear hatch...so even if storage was minimal, to be able to get an arm in there to thread on a nut etc would be nice.

The thought might be that with the rear hbars etc one might not need to add any custom holes or fittings in the rear...but cmon, customizing a kayak is like artwork, you know someone is going to do it!
absentx is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.