![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | |
Sea Hunter
|
Ya I missed out....
Quote:
I was like the high banks drifter that came in, at the end. ![]()
__________________
Duke Mitchell Last edited by MITCHELL; 02-22-2024 at 11:52 AM. |
|
![]() |
![]() |
![]() |
#2 |
Sea Hunter
|
Completed another step...
Two products I used to restore my cork grips
Filler and sealer.
__________________
Duke Mitchell Last edited by MITCHELL; 03-01-2024 at 06:04 PM. |
![]() |
![]() |
![]() |
#3 |
Sea Hunter
|
You want to have the vacuum ready
To clean up the mess
Had to spin motor wide open to sand.... Slow was wobbly and fast as my motor would spin was smooth. You might say I put the wood to it.... I used alot of filler....one time got er done.
__________________
Duke Mitchell Last edited by MITCHELL; 02-26-2024 at 04:15 AM. |
![]() |
![]() |
![]() |
#4 |
Sea Hunter
|
Had alot of sanding
To do....1in strip sand paper work good
__________________
Duke Mitchell |
![]() |
![]() |
![]() |
#5 |
Sea Hunter
|
After drying over night
And sanding I vacuumed up the mess before applying sealer.
One time with the filler got er done
__________________
Duke Mitchell Last edited by MITCHELL; 02-26-2024 at 04:14 AM. |
![]() |
![]() |
![]() |
#6 |
Sea Hunter
|
Good thing I did not....
Destroy my rubber finish ring at the end there is nothing I could replace it with.
Happy how it came out.
__________________
Duke Mitchell |
![]() |
![]() |
![]() |
#7 |
Sea Hunter
|
I had holes 🕳 in the cork....
Almost down to the blank
If you get back 5ft you can't even see the wood filler. It looks better than these pictures show. They don't do it justice
__________________
Duke Mitchell |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|