water pump recommendation must pump through scupper holes - Kayak Fishing Adventures on Big Water’s Edge

Rob929 · 10-29-2009, 12:52 PM

There is probably a hundred ways to do it.. Standard bilge pump might be able to be plumbed through scupper with pvc/ or clear vinyl tubing. Or you can
use an "aerator" style bilge pump. It will have an inlet tube pre-installed. If that doesn't fit through your scupper, modify it with the correct size pvc and fittings.

10-29-2009, 12:52 PM	#2
Rob929 Senior Member Join Date: Nov 2008 Location: San Diego Posts: 134	There is probably a hundred ways to do it.. Standard bilge pump might be able to be plumbed through scupper with pvc/ or clear vinyl tubing. Or you can use an "aerator" style bilge pump. It will have an inlet tube pre-installed. If that doesn't fit through your scupper, modify it with the correct size pvc and fittings. Last edited by Rob929; 10-30-2009 at 09:59 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode