Adding rod holders to a Hobie Revo - Kayak Fishing Adventures on Big Water’s Edge

tony · 01-13-2010, 06:37 PM

One possibility if you dont have your fishfinder mounted there already and you dont want to cut new holes in your kayak or you dont want anything on the rails is the Ram Wedge Mount in the mast hole. You would have to scoot forward to grab the rod however.....
http://www.kayakfishingsupplies.com/...Mount-1/Detail

If you have a big enough mounting plate on there you could probably mount whatever you want....fishfinder,rodholder,boombox.....I believe the newer Revo's have the reinforced mast hole tubes.
Or better yet call the guys at OEX Oceanside (Hobie dealers)

01-13-2010, 06:37 PM	#2
tony Senior Member Join Date: Apr 2005 Location: La Jolla Posts: 130	One possibility if you dont have your fishfinder mounted there already and you dont want to cut new holes in your kayak or you dont want anything on the rails is the Ram Wedge Mount in the mast hole. You would have to scoot forward to grab the rod however..... http://www.kayakfishingsupplies.com/...Mount-1/Detail If you have a big enough mounting plate on there you could probably mount whatever you want....fishfinder,rodholder,boombox.....I believe the newer Revo's have the reinforced mast hole tubes. Or better yet call the guys at OEX Oceanside (Hobie dealers) Last edited by tony; 01-13-2010 at 06:54 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode