Sonar Discussion - Kayak Fishing Adventures on Big Water’s Edge

TCS · 12-14-2010, 06:28 PM

Has anyone tried mounting the transducer to the mast in a hobie adventure? I'm wondering if the mast is in a low spot or if I need to put a well around it to add water.

Also, anybody want to share default settings for an HDS in LJ? If not, no worries, I'll just go 'auto'. Maybe use bottom lock? They don't seem to have a saltwater setting, just shallow or deep. Is 120' deep?

Billy, thanks for the transducer info, I was wondering about that. I think I'll pass on purchasing your sonar porn, although I'll admit I'm curious...

I'll probably go on Friday to try it out.

Wade, you get yours yet?

I'll be fishing with Josh in March for sure, just to make sure I don't hurt myself with this thing...

flydigital · 12-14-2010, 08:15 PM

It's worth a shot... It works fine on the revo, strapping the transom bracket to the mast with zip ties (ducer must be faced backwards though as it doesn't fit between drive well and mast). I do believe this is the low spot on both models. If it doesn't work or you need too much water for it to work right, you can easily add a foam well around it. On the revo about 2 cups of water does the trick, with no loss of signal with pitching/rolling movement.

As for settings, its pretty subjective as to what works best, but I was able to start with the default and try adjusting everything, and within 2-3 trips out I had a good handle on it and was able to get it working great. I don't use any auto modes, and manually adjust sensitivity and colorline each time out, sometimes adjusting throughout the day (diff settings for each freq). When I first tried the 'modes' I believe it was shallow water that worked best. All these modes do is adjust the settings, but its good to go through them while you are out and see how they look compared to each other, paying attention to the settings used. Hope that helps a bit at least until you get some better advice from those who have more experience with it. Good luck!

12-14-2010, 06:28 PM	#1
TCS Senior Member Join Date: May 2009 Posts: 478	Getting the HDS tomorrow! A couple more questions Has anyone tried mounting the transducer to the mast in a hobie adventure? I'm wondering if the mast is in a low spot or if I need to put a well around it to add water. Also, anybody want to share default settings for an HDS in LJ? If not, no worries, I'll just go 'auto'. Maybe use bottom lock? They don't seem to have a saltwater setting, just shallow or deep. Is 120' deep? Billy, thanks for the transducer info, I was wondering about that. I think I'll pass on purchasing your sonar porn, although I'll admit I'm curious... I'll probably go on Friday to try it out. Wade, you get yours yet? I'll be fishing with Josh in March for sure, just to make sure I don't hurt myself with this thing...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-14-2010, 08:15 PM	#2
flydigital Senior Member Join Date: Aug 2009 Posts: 192	It's worth a shot... It works fine on the revo, strapping the transom bracket to the mast with zip ties (ducer must be faced backwards though as it doesn't fit between drive well and mast). I do believe this is the low spot on both models. If it doesn't work or you need too much water for it to work right, you can easily add a foam well around it. On the revo about 2 cups of water does the trick, with no loss of signal with pitching/rolling movement. As for settings, its pretty subjective as to what works best, but I was able to start with the default and try adjusting everything, and within 2-3 trips out I had a good handle on it and was able to get it working great. I don't use any auto modes, and manually adjust sensitivity and colorline each time out, sometimes adjusting throughout the day (diff settings for each freq). When I first tried the 'modes' I believe it was shallow water that worked best. All these modes do is adjust the settings, but its good to go through them while you are out and see how they look compared to each other, paying attention to the settings used. Hope that helps a bit at least until you get some better advice from those who have more experience with it. Good luck!