06-09-2014, 08:19 AM | #41 |
Member
Join Date: Feb 2013
Location: Fullerton
Posts: 67
|
|
06-13-2014, 01:00 PM | #42 | |
Senior Member
Join Date: Apr 2009
Location: Bozeman, Montana
Posts: 164
|
Quote:
In addition you have attached the tow line to the front cap with two carabiners? Any reason for this? Just trying to understand your set up is all... thanks! Also, how did those green drain caps work out for you? Was just wondering whether to use those or the white PVC Schedule 40 caps with a bunch of 3/8" holes drilled in to them instead? Hmmm...
__________________
- Ken Redondo Beach, CA 2011 Malibu Stealth 14 |
|
06-13-2014, 01:32 PM | #43 |
Junior
Join Date: Jul 2011
Location: La Mesa, CA
Posts: 29
|
Bait Tubes
Here are the bait tubes I made. Same basic idea. They work great.
|
06-13-2014, 05:08 PM | #44 |
Senior Member
Join Date: Apr 2009
Location: Bozeman, Montana
Posts: 164
|
Nice set up... are those small hinges you installed on the trap door? Are they stainless steel or? Won't they rust quickly if they aren't? I looked for some small s/s hinges at Home Depot the other day and came up empty handed... I kind of like the trap door idea!
__________________
- Ken Redondo Beach, CA 2011 Malibu Stealth 14 |
06-16-2014, 01:50 PM | #45 |
Junior
Join Date: Jul 2011
Location: La Mesa, CA
Posts: 29
|
RE: Trap Door Hinges
Thanks! Yes they are small "brass" hinges that I got at Home Depot.I figured they might tarnish and turn green if anything. The trap door makes it easy to get bait in and out of the tubes.
|
06-16-2014, 08:35 PM | #46 |
Member
Join Date: Feb 2008
Posts: 77
|
Stupid question time
What is the white piece the bungee catches on to keep the lid closed? Also, how is it mounted? Glued to the surface of the pipe or what? Thanks for sharing your design, looks like a great solution.
|
08-11-2015, 11:04 PM | #47 | |
Junior
Join Date: Apr 2014
Posts: 10
|
Quote:
|
|
08-13-2015, 03:34 PM | #48 | |
Senior Member
Join Date: Jun 2015
Posts: 370
|
Quote:
Where on your kayak are you attaching the line? I'm assuming a side eyelet. Do you ever have problems with the line and your rudder? Sent from my iPhone using Tapatalk |
|
08-14-2015, 09:09 AM | #49 |
Senior Member
Join Date: Jun 2015
Posts: 370
|
Are these orange bungies the same as the blue bungies you are using?
|
08-14-2015, 10:39 AM | #50 |
Senior Member
Join Date: Jun 2015
Posts: 370
|
Thanks for sharing your design 45user. I look forward to trying it out the next time I'm on the water
|
08-14-2015, 02:37 PM | #51 |
Senior Member
Join Date: Jun 2015
Posts: 370
|
Bait tubes
Version 2.0
After seeing how easily the green cap came off with the original design I revamped it a bit I used the bungie off of a red tow flag from HD. It had a carabiner on one end and a circle on the other. I cut off the circle, fished it through one cap, down the tube, then around the outside and through the original eyelet that the carabiner was connected to then reconnected the circle and used heat shrink to keep it secure. So I plan to tow from the metal circle which pulls the entire length of bungie. The more you pull the tighter both ends seal. I figure having the shock cord of the bungie will be helpful when towing it through the swells and will hopefully make for a softer and less jerky ride for the bait. Sent from my iPhone using Tapatalk Last edited by HobieScot; 08-15-2015 at 09:14 AM. |
08-14-2015, 02:49 PM | #52 |
Senior Member
Join Date: Apr 2010
Location: San Pedro
Posts: 694
|
|
08-15-2015, 07:26 AM | #53 |
Senior Member
Join Date: Jun 2015
Posts: 370
|
How much line are you guys using for the tow line?
I know some have enough to tow behind the kayak. But wouldn't that cause problems by getting tangled in the rudder? Why not just have it attached just to the side where you can reach it easily? I'm not too concerned with a shark chewing on it so having it on the side seems like the most convenient way to go I've never used one before so I don't know the logistics of how to use one yet. Can some of you using them chime in with how you are towing them and why you chose to do it that way Thanks in advance Sent from my iPhone using Tapatalk |
08-15-2015, 08:40 AM | #54 |
Member
Join Date: May 2015
Location: Vista, CA
Posts: 70
|
I tow it behind when on the move because having it bang into the kayak is annoying and it gets in the way of the paddle.
|
08-15-2015, 02:50 PM | #55 |
Senior Member
Join Date: Apr 2010
Location: San Pedro
Posts: 694
|
i do the same thing... just enough tow line to pass the rudder and into the vacuum created by the kayak... not much drag. in the hobie, i just drag it alongside the kayak. when fishing a location, i attach it close.
|
08-15-2015, 02:52 PM | #56 |
Senior Member
Join Date: Jun 2015
Posts: 370
|
Thanks for the tips
I'll be trying my new design out the next time I head out Sent from my iPhone using Tapatalk |
08-19-2015, 11:01 PM | #57 |
Senior Member
Join Date: Aug 2015
Location: Ventura, CA
Posts: 376
|
I got on the band wagon tonight. Been running the Frabill floating bait bucket...most places that I fish are not to far out, I make bait where I am fishing so I tend to no worry about drag, or going to far with the bait on board. Im starting to venture out to new areas that require longer paddles/peddles and so I am trying out a bait tube. Made this in about 30-45 mins tonight. $30 in parts.
|
08-20-2015, 12:20 PM | #58 |
Sea Hunter
|
20150820_130804.jpg
20150820_130742.jpgMy 50...and 100...caliber bait barrels been using them for years what more do you want when you catch 3yellows and stop cause you don't want any more and released your last mackerel free
__________________
Duke Mitchell |
08-20-2015, 12:36 PM | #59 |
Sea Hunter
|
Stopped with 3
__________________
Duke Mitchell |
08-20-2015, 12:40 PM | #60 |
Sea Hunter
|
F...k it this website a pain in the ass to use
__________________
Duke Mitchell |
|
|