Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-16-2015, 06:30 AM   #7
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,523
Sailing mast mount 1.5 " ball

Very few guys go this route , but some of the key advantages are : the rail is free in the event of having to do an open water recovery, and the unit can be placed inside the kayak without removing wires (possibly running risk of exposure to corrosion). I also prefer the rail clear as much possible when fighting or landing big fish , especially something like a large halibut that might be clipped in and secured while still alive and thrashing . Another key advantage of placing on the mast is that your peddling , and or paddling will not be hindered from the forward placement of the unit . Two disadvatages are that the unit might be harder to adjust , and visibility can be reduced (which can be easily solved by buying a 9" inch screen or 7" inch.) Another advantage of using the sailing mast mount is that you are not drilling into rail of kayak . On my installation I did use a Hobie wire plug kit which is very clean and has a factory installation look. Small things like these can help with resale value when considering upgrading in the future . Pictures can be made available if needed .
TJones is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 06:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.