04-11-2016, 08:40 AM | #1 |
Senior Member
Join Date: Feb 2014
Location: Carlsbad
Posts: 170
|
FF question
And if so, what frequency is yours set at my options are 83, 200, and split screen 83/200 Thanks Sent from my iPhone using Tapatalk
__________________
|
04-11-2016, 08:52 AM | #2 | |
Lurker
Join Date: Feb 2016
Location: Riverside
Posts: 431
|
Quote:
Do you have the HDI 5? A buddy with the 3 or 4, one of my first trips out paddled up to me to try and figure the same thing out. When he dropped his yoyo next to me on his FF, you could see that thing clearly dropping right down the water column in live time, A thin Purple streaking line straight to the bottom; but what my FF was relaying was much slower and thicker, and looked as if it was floating slowly to the bottom.. On my HDI 5 i have the 50/200 and 83/200 option which allows for shallow water/deep water viewing, but I believe the issue is with the ping speed and the sensitivity, which I play with every time on the water to try and get that perfect picture so I'm def all ears as well.
__________________
"A Reel expert can Tackle anything " ~Malibu Stealth-14 ~Malibu X-13 |
|
04-11-2016, 09:52 AM | #3 |
Senior Member
Join Date: Feb 2009
Location: SAN DIEGO
Posts: 1,086
|
The simple answer is... have your chart speed at ultra speed on a wide view. It works on any FF to see your line on your screen.
When I'm fishing real shallow ( halibut fishing) I turn it back to normal speed. Last edited by driftwood; 04-11-2016 at 10:01 AM. |
04-12-2016, 04:35 PM | #4 | |
Senior Member
Join Date: Feb 2014
Location: Carlsbad
Posts: 170
|
Quote:
I will test that next time. Thank you very much for the valuable info.
__________________
|
|
04-12-2016, 04:37 PM | #5 |
Senior Member
Join Date: Feb 2014
Location: Carlsbad
Posts: 170
|
Mine is Lowrance Mark 4 with chart plotter, not an HDI.
__________________
|
04-12-2016, 05:09 PM | #6 |
Senior Member
Join Date: Feb 2009
Location: SAN DIEGO
Posts: 1,086
|
|
04-12-2016, 05:17 PM | #7 |
Senior Member
Join Date: Mar 2010
Posts: 1,972
|
It's very cool to see big fish show up on the screen but the transducer's cone is very narrow. My transducer is set to "see" things just ahead of my bow. If my bait/weight is fairly straight up and down, they show up on the screen.
I've shown this pic before. All of the horizontal lines are weights or baits. The angled lines are the quality fish. To see four fish in on the screen is unusual for me. I got bit immediately after this pic was taken. Jim
__________________
Recreational Fisherman's Catch...2% Commercial Fisherman's Catch- 98% Recreational Fishing Kayakers Catch- .00001% "The reality is that the wall was built to keep all Asians ~specifically Japanese and those that think they're japanese~ out of the U.S" Last edited by Deamon; 04-12-2016 at 05:34 PM. |
04-12-2016, 07:37 PM | #8 |
Senior Member
Join Date: Aug 2009
Location: Point Loma
Posts: 584
|
Jim, that picture is useless without coordinates.
|
04-13-2016, 09:47 AM | #9 |
Senior Member
Join Date: Jul 2012
Location: Oceanside, CA
Posts: 419
|
Is your transducer mounted inside thee hull or outside?
I have the Lowrance Elite 5 HDI and it is mounted inside the hull. This is my experience... After being on the water for a while I wasn't seeing the lure dropping. I could see everything else like bait and fish but the extra detail wasn't there. Then water started filling into the hull after several hours out there. All of a sudden I could here the pinging and started seeing the line dropping down. So I surmised that this transducer needs to be in the water. I still have it mounted in the hull but now a mounted a Tupperware box around it and fill it with water before I head out and it works perfectly. [IMG][/IMG] [IMG][/IMG]
__________________
|
04-13-2016, 10:43 AM | #10 |
Senior Member
Join Date: Mar 2010
Posts: 1,972
|
I get pooped on this but...someone told said Josh did it like this, so if its good enough for him...
My transducer sits inside the front Hobie hatch, next to the sail post, loose. It sits up just right. I'm careful to not allow my stored stuff move it around but this is not an issue. All loaded and on the water, it also happens to be the low point in the yak too. After dropping in, I drop in a couple of handfuls of water and that moves to the transducer giving me a clear read. No good, no putty, no inserts. Jim
__________________
Recreational Fisherman's Catch...2% Commercial Fisherman's Catch- 98% Recreational Fishing Kayakers Catch- .00001% "The reality is that the wall was built to keep all Asians ~specifically Japanese and those that think they're japanese~ out of the U.S" |
04-13-2016, 10:45 AM | #11 |
Senior Member
Join Date: Mar 2010
Posts: 1,972
|
I get pooped on this but...someone told said Josh did it like this, so if its good enough for him...
My transducer sits inside the front Hobie hatch, next to the sail post, loose. It sits up just right. I'm careful to not allow my stored stuff move it around but this is not an issue. All loaded and on the water, it also happens to be the low point in the yak too. After dropping in, I put in a couple of handfuls of water and that moves to the transducer giving me a clear read. No goop, no putty, no inserts. Jim
__________________
Recreational Fisherman's Catch...2% Commercial Fisherman's Catch- 98% Recreational Fishing Kayakers Catch- .00001% "The reality is that the wall was built to keep all Asians ~specifically Japanese and those that think they're japanese~ out of the U.S" |
04-13-2016, 02:32 PM | #12 | |
Paddle for Mahi
Join Date: Mar 2005
Location: Doing the happy paddle!
Posts: 848
|
Quote:
In the words of "Kelly" Johnson, K.I.S.S.!! |
|
|
|