malibu kayak x factor trolling motor experience and rigging - Kayak Fishing Adventures on Big Water’s Edge

Saba Slayer · 11-28-2018, 06:52 PM

Just bolt a 3" x 3" aluminum angle to the kayak and let it extend out to one side with just enough clearance to tilt the motor...and then mount your motor with the clamps and you should be good to go...
A good Group 24 battery won't be cheap, but it should last you a long enough time if you don't go blasting around at full speed...don't run it down all the way and keep it charged and it should last a while.
Good Luck...!

11-28-2018, 06:52 PM	#1
Saba Slayer Senior Member Join Date: May 2007 Location: Palos Verdes Posts: 1,846	mount Just bolt a 3" x 3" aluminum angle to the kayak and let it extend out to one side with just enough clearance to tilt the motor...and then mount your motor with the clamps and you should be good to go... A good Group 24 battery won't be cheap, but it should last you a long enough time if you don't go blasting around at full speed...don't run it down all the way and keep it charged and it should last a while. Good Luck...! __________________ Jim / Saba Slayer