Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

dsafety · 09-19-2019, 02:10 PM

When I first began fishing from a kayak in 2008, things were pretty simple. You paddled out, caught bait and trolled. There were plenty of fish in LJ back then so most fishing trips were usually fairly successful. Many of us did not even start out with a fish finder or bait tank. Things began to change quickly as Hobie’s pedal-powered yaks began to transform kayak fishing in a very good way.

Along with the propulsion transformation, the kayaks themselves began to evolve as well. The new designs provided places for bait tanks and fish finders, both game changers.

Back in the day, most fish finders were simple sonar units. Sonar-only transducers have the ability to transmit through plastic so most were mounted inside the kayak hulls. Mounting methods included gluing the transducer to the hull as well as suspending the unit a water or grease reservoir. Each of these options worked pretty well.

Fast forward about 10 years and we began seeing more advanced fish finders hit the market, some costing as much as the kayak to which they are attached. The new technology added down imaging and even side imaging capabilities. These advancements came at a cost, however. Down and side imaging signals do not penetrate plastic very well so if one wants to get the most of this new technology, the new transducers have to be mounted outside the kayak with an unobstructed view of the ocean below.

The good news is that some of the newest kayak designs now have an exterior transducer mounting “pocket” molded into the hull. The bad news is that those of us with older boats now have to come up with a workaround. This post documents my solution.

When I returned to kayak fishing this summer after a couple-year layoff, I discovered that some of my gear no longer worked. The fish finder did not survive my first day on the water a month or so ago so I went shopping for a replacement.

I found a great deal on a Lowrance Hook 2 unit. Lowrance is offering rebates of $50 or $100 on most of their fish finder models right now. The offer expires October 31st 2019. I ended up with their 7X Splitshot model. The Splitshot version offers both sonar and down vision imaging along with GPS tracking. Other models add side vision imaging, and detailed maps. After rebate, my new fish finder set me back a very reasonable $180.

Now to the next challenge, how and where to mount the transducer. My old boat does not have a suitable place to mount the transducer on the outside of the hull. I did a little research and discovered that both Ram and Scotty sell mounting arms that can be attached to tracks or balls which have been mounted to the kayak deck. I chose the Scotty 141 model for its adjustability and track-mount capability.

The Scotty 141 includes their “Gear Head Adaptor” which allows accessories to be easily connected and disconnected from the transducer arm. I used this feature to create a mounting platform for my new fish finder.

As anyone who has ever installed a fish finder on a kayak knows, these things come with very long wires that link the fish finder to the transducer. For internal mounts all that wire usually ends up being stowed somewhere inside the kayak.

Given that my new fish finder rig would be mounted on the rail of my kayak and the fact that I transport and store my kayak upside down, resting on the rails, I needed to find a way to make the entire fish finder and transducer arm completely removable from the kayak so nothing was in the way while being transported or stored. The solution was remarkably simple. I just wrapped all the excess transducer wire around the transducer arm and zip tied everything in place. None of the transducer wiring enters or exits the hull.

Up next was the fish finder mounting platform. I bought Scotty’s Universal Fish Finder adapter which attaches to the Gear Head connected to a narrow track that I mounted to the rail. The universal mount was not large enough to accommodate my 7” fish finder but a trip to Wal-Mart and about $2 provided me with a small plastic cutting board that I trimmed to a suitable size and attached to the top of the Scotty mount.

The final step was to figure out how to get power to my newly installed setup. Again this issue proved have a simple solution. I already had a battery storage area in the stern of my yak with wiring that ran the length of the hull. I was a little uncomfortable as I drilled a one inch hole into the side of my yak but West Marine’s Thru Bulkhead Wire Cap created a nearly waterproof wiring port.

One nice feature of this wire cap is that while the fitting is close to being water tight, the power wire can be easily pushed in or pulled from the hull. This means that when I button things up for transport, most of the power wire can be pushed into the hull so nothing is left to flap around in the wind while driving at freeway speeds.

The maiden voyage with my new fish finder uncovered a few problems. The platform that the device was mounted on extended too far into the cockpit, interfering with my peddling and my 6 year old battery decided that it was time to throw in the towel. Both of these problems were quickly resolved.

The next time out everything worked perfectly. Well almost everything. While the new fish finder displayed plenty of bait balls, the fish in those bait balls refused to attack my sabiki flies. I felt fortunate to catch four small Spanish. In the end, it did not matter because the bigger fish had taken the day off as well. The only fish we heard about that day were a couple of rock fish and small calicos. Maybe next time.

While I would love to upgrade to one of the latest and greatest kayak models that are designed to accommodate the modern fish finders and other things that yakfishers utilize, I will have to make do with what I have for the foreseeable future. Meanwhile, I look forward to having a new fish finder that has a screen twice the size of my previous unit along with the addition of down imaging. Now I just have to figure out how to use this great new tool. That should be fun. It might even improve my fishing.

FISH11 · 09-19-2019, 02:42 PM

Great write up and installation, Bob. Looks great and should be awesome when the Yellows hook up, and you get to see them on the new FF screen. Thanks for sharing, it should help guys with their installation plans.

2013outback · 06-10-2020, 06:23 PM

Needed a cutting board and saw someone post on this thread a similiar idea, hope you don’t mind my take on it🤙🏽 Cheers. Have more mods coming up too will be posting soon as I start to learn to use this forum. I’m in Newport Beach and new to kayaking but if anyone is in the area shoot me a dm and let’s exchange numbers and meet up. Thanks guys, this forum is rad, glad stumbled upon it🤙🏽

SoCalEDC · 06-11-2020, 07:55 AM

Quote:

Originally Posted by whereubinh

Just recently upgraded my fish finder on my hobie and found out that the transducer did not fit into the hobie lowrance ready hull. I tried a couple of diy on youtube to add an extension to the provided adapter and tried to attach it to the existing lowrance ready cover but it cause the tranducer end to stick out of the back of the cover. When the cover was tighten down, it crushed the end of the transducer and I didn't think it was a good idea to keep it liek that. I Came up with a pretty solid solution to mount the transducer so that it fits completely in the transducer slot using my 3d modeling skills and a 3d printer. I put in a giant open to provide maximum water flow and to prevent sand from being trapped inside the cover. I was getting tired of having to flush all the sand out after every use as the sand builds up greatly and falls all over my car roof when transferring. If anyone needs something similar for their garmin transducer, lmk. I can help out. This diy could've came out really bad if I didn't have access to a CAD software or a 3d printer.

very cool solution.

Quote:

Originally Posted by 2013outback

Needed a cutting board and saw someone post on this thread a similiar idea, hope you don’t mind my take on it🤙🏽 Cheers. Have more mods coming up too will be posting soon as I start to learn to use this forum. I’m in Newport Beach and new to kayaking but if anyone is in the area shoot me a dm and let’s exchange numbers and meet up. Thanks guys, this forum is rad, glad stumbled upon it🤙🏽

cool, does that render your hatch unusable?

2013outback · 06-11-2020, 11:38 AM

Quote:

Originally Posted by SoCalEDC

very cool solution.

cool, does that render your hatch unusable?

The cutting board is strapped onto the lid of the hatch with shock cord. Knot on each end and therefore making the cutting board stay perfectly in place and also makes the hatch handle easily accessible . Just lift the cutting board with same hand and lift turn and open the hatch.

Tried to upload a picture and video but it’s not workIng

JohnMckroidJr · 10-31-2020, 10:33 AM

Tuna Tubes

SoCalEDC · 11-09-2020, 11:31 AM

Quote:

Originally Posted by JohnMckroidJr

Tuna Tubes

Cool, what are you fishing for out there that require baits that size? Big grouper?

JohnMckroidJr · 11-11-2020, 09:43 PM

Quote:

Originally Posted by SoCalEDC

Cool, what are you fishing for out there that require baits that size? Big grouper?

The baits are generally no bigger than 1 to 3lbs, but the Small Tunas are a favorite food of many species. It's kind of like using live squid in SoCal in that everything wants to eat them. The challenge is keeping them alive and presenting them to the right species without catching a less desirable Barracuda or worse yet, Shark. So far I have taken Wahoo, Sailfish, King Mackerel and Black Grouper on them. Lately, Barracuda is all I have been able to get with the tunas, but I did have something good hanging for 45 minutes on 40lb test before I got greedy tweeked the drag just a little too tight, breaking the wire leader

Earlier this year a World record 97.8lb King Mackerel was taken on a Little Tunny in the same waters that are frequently fished by kayaks. Wouldn't it be sick if the next world record King Mackerel was taken off a kayak?

09-19-2019, 02:10 PM	#1
dsafety Olivenhain Bob Join Date: May 2008 Location: Olivenhain, CA Posts: 1,121	Installing a fish finder with exterior transducer mount When I first began fishing from a kayak in 2008, things were pretty simple. You paddled out, caught bait and trolled. There were plenty of fish in LJ back then so most fishing trips were usually fairly successful. Many of us did not even start out with a fish finder or bait tank. Things began to change quickly as Hobie’s pedal-powered yaks began to transform kayak fishing in a very good way. Along with the propulsion transformation, the kayaks themselves began to evolve as well. The new designs provided places for bait tanks and fish finders, both game changers. Back in the day, most fish finders were simple sonar units. Sonar-only transducers have the ability to transmit through plastic so most were mounted inside the kayak hulls. Mounting methods included gluing the transducer to the hull as well as suspending the unit a water or grease reservoir. Each of these options worked pretty well. Fast forward about 10 years and we began seeing more advanced fish finders hit the market, some costing as much as the kayak to which they are attached. The new technology added down imaging and even side imaging capabilities. These advancements came at a cost, however. Down and side imaging signals do not penetrate plastic very well so if one wants to get the most of this new technology, the new transducers have to be mounted outside the kayak with an unobstructed view of the ocean below. The good news is that some of the newest kayak designs now have an exterior transducer mounting “pocket” molded into the hull. The bad news is that those of us with older boats now have to come up with a workaround. This post documents my solution. When I returned to kayak fishing this summer after a couple-year layoff, I discovered that some of my gear no longer worked. The fish finder did not survive my first day on the water a month or so ago so I went shopping for a replacement. I found a great deal on a Lowrance Hook 2 unit. Lowrance is offering rebates of $50 or $100 on most of their fish finder models right now. The offer expires October 31st 2019. I ended up with their 7X Splitshot model. The Splitshot version offers both sonar and down vision imaging along with GPS tracking. Other models add side vision imaging, and detailed maps. After rebate, my new fish finder set me back a very reasonable $180. Now to the next challenge, how and where to mount the transducer. My old boat does not have a suitable place to mount the transducer on the outside of the hull. I did a little research and discovered that both Ram and Scotty sell mounting arms that can be attached to tracks or balls which have been mounted to the kayak deck. I chose the Scotty 141 model for its adjustability and track-mount capability. The Scotty 141 includes their “Gear Head Adaptor” which allows accessories to be easily connected and disconnected from the transducer arm. I used this feature to create a mounting platform for my new fish finder. As anyone who has ever installed a fish finder on a kayak knows, these things come with very long wires that link the fish finder to the transducer. For internal mounts all that wire usually ends up being stowed somewhere inside the kayak. Given that my new fish finder rig would be mounted on the rail of my kayak and the fact that I transport and store my kayak upside down, resting on the rails, I needed to find a way to make the entire fish finder and transducer arm completely removable from the kayak so nothing was in the way while being transported or stored. The solution was remarkably simple. I just wrapped all the excess transducer wire around the transducer arm and zip tied everything in place. None of the transducer wiring enters or exits the hull. Up next was the fish finder mounting platform. I bought Scotty’s Universal Fish Finder adapter which attaches to the Gear Head connected to a narrow track that I mounted to the rail. The universal mount was not large enough to accommodate my 7” fish finder but a trip to Wal-Mart and about $2 provided me with a small plastic cutting board that I trimmed to a suitable size and attached to the top of the Scotty mount. The final step was to figure out how to get power to my newly installed setup. Again this issue proved have a simple solution. I already had a battery storage area in the stern of my yak with wiring that ran the length of the hull. I was a little uncomfortable as I drilled a one inch hole into the side of my yak but West Marine’s Thru Bulkhead Wire Cap created a nearly waterproof wiring port. One nice feature of this wire cap is that while the fitting is close to being water tight, the power wire can be easily pushed in or pulled from the hull. This means that when I button things up for transport, most of the power wire can be pushed into the hull so nothing is left to flap around in the wind while driving at freeway speeds. The maiden voyage with my new fish finder uncovered a few problems. The platform that the device was mounted on extended too far into the cockpit, interfering with my peddling and my 6 year old battery decided that it was time to throw in the towel. Both of these problems were quickly resolved. The next time out everything worked perfectly. Well almost everything. While the new fish finder displayed plenty of bait balls, the fish in those bait balls refused to attack my sabiki flies. I felt fortunate to catch four small Spanish. In the end, it did not matter because the bigger fish had taken the day off as well. The only fish we heard about that day were a couple of rock fish and small calicos. Maybe next time. While I would love to upgrade to one of the latest and greatest kayak models that are designed to accommodate the modern fish finders and other things that yakfishers utilize, I will have to make do with what I have for the foreseeable future. Meanwhile, I look forward to having a new fish finder that has a screen twice the size of my previous unit along with the addition of down imaging. Now I just have to figure out how to use this great new tool. That should be fun. It might even improve my fishing.

09-19-2019, 02:42 PM	#2
FISH11 Member Join Date: Aug 2013 Location: Pine Valley when not fishing La Jolla Posts: 2,636	Great write up and installation, Bob. Looks great and should be awesome when the Yellows hook up, and you get to see them on the new FF screen. Thanks for sharing, it should help guys with their installation plans. __________________ MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids )