Kayak maintenance

[FlyFishinYakr]

Originally Posted by Dee84cali

What about that 303 aerospace protectant?


Sent from my iPhone using Tapatalk

I bought that stuff by the gallon (I think I still have about 1/2 gallon left) when I had a float tube and PAC 800 Pontoon boat. It kept them from fading to a minimum and because of the slick coating it seemed to help me glide through the water. It also reduced the slime/algae coating from some of the lakes I've fished which I hope will do the same for my kayak (or rather oil and tar balls up here)!.
As with my reels during the season or between servicings I use this to keep screws and bolts from freezing or corroding also (along with Corrosion X) ;
http://www.amazon.com/s/ref=nb_sb_ss...sporting%2C402
I was introduced to this cleaner when I was working in a tackle shop and trained how to properly service reels, it seemed to help frozen screws and bolts when soaked overnight.
FFY

[HobieScot]

Originally Posted by FlyFishinYakr

I bought that stuff by the gallon (I think I still have about 1/2 gallon left) when I had a float tube and PAC 800 Pontoon boat. It kept them from fading to a minimum and because of the slick coating it seemed to help me glide through the water. It also reduced the slime/algae coating from some of the lakes I've fished which I hope will do the same for my kayak (or rather oil and tar balls up here)!.
As with my reels during the season or between servicings I use this to keep screws and bolts from freezing or corroding also (along with Corrosion X) ;
http://www.amazon.com/s/ref=nb_sb_ss...sporting%2C402
I was introduced to this cleaner when I was working in a tackle shop and trained how to properly service reels, it seemed to help frozen screws and bolts when soaked overnight.
FFY

Good call on the CLP. That's another product I use. It's designed for the firearms industry and its what I use on all my guns for hunting season. I never thought to use it on fishing gear.




Sent from my iPhone using Tapatalk

[SASQUATCH]

A great solution for stuck bolts/ rusty hardware is 50% acetone and 50% transmission fluid. Was tested against all the top brands of break free solutions and beat them hands down. I've used it many times and swear its the only way to go. Way less expensive too. Try it, you'll be a believer.