DIY kayak lift assist? Hullavator? - Kayak Fishing Adventures on Big Water’s Edge

oredith · 08-22-2017, 08:16 AM

so, the J-hooks were a no-go. gave it one more try with the wife and it was a disaster. I threw something together with 2x4 blocking, some hardware i had around the house, and some schedule 40 2" pvc pipes.

it's a tight squeeze, and i'm going to be getting more schedule 40 tubing from IMS to extend the bar so that it's not so tight fitting, but it worked. it was easy to just prop the bow over my head and slot it onto the PVC carriage I made, and then just get to the stern and push the yak up. it goes on so smoothly, that I think i need to add something to stop it from going too far over the front!

the carriage then detaches from the back and I can put it on the other side and load the other yak. it's ugly, but it works!

08-22-2017, 08:16 AM	#21
oredith Junior Join Date: Jul 2017 Posts: 29	so, the J-hooks were a no-go. gave it one more try with the wife and it was a disaster. I threw something together with 2x4 blocking, some hardware i had around the house, and some schedule 40 2" pvc pipes. it's a tight squeeze, and i'm going to be getting more schedule 40 tubing from IMS to extend the bar so that it's not so tight fitting, but it worked. it was easy to just prop the bow over my head and slot it onto the PVC carriage I made, and then just get to the stern and push the yak up. it goes on so smoothly, that I think i need to add something to stop it from going too far over the front! the carriage then detaches from the back and I can put it on the other side and load the other yak. it's ugly, but it works!