Bait tank primer bulb? - Kayak Fishing Adventures on Big Water’s Edge

RGB · 01-02-2013, 09:19 PM

I'm doing a pretty similar setup right now and my plan is to use a one way check valve mounted on the pump inlet. This setup will still require priming which can easily be done by opening the pump housing and pouring a little water in. In my case, i'll be mounting the aerator head low on the tank so i'll also be able to partially fill the tank and it will self prime. I got some inspiration from here:http://www.bigwatersedge.com/bwevb/s...+bucket&page=2

01-02-2013, 09:19 PM	#10
RGB Member Join Date: Aug 2012 Location: El Cajon Posts: 45	I'm doing a pretty similar setup right now and my plan is to use a one way check valve mounted on the pump inlet. This setup will still require priming which can easily be done by opening the pump housing and pouring a little water in. In my case, i'll be mounting the aerator head low on the tank so i'll also be able to partially fill the tank and it will self prime. I got some inspiration from here:http://www.bigwatersedge.com/bwevb/s...+bucket&page=2 __________________ -Ron Last edited by RGB; 01-02-2013 at 09:25 PM.