Shimano Torium . - Kayak Fishing Adventures on Big Water’s Edge

yaky yak · 11-18-2011, 08:05 PM

I have had this reel serviced, new drags installed, Can anyone tell me why it sounds like a coffee grinder? I clean it and lightly lube it after each use. Is this just the nature of the beast?
It's caught a lot of fish over the years, but its down right embarrassing its so loud. Any ideas? Thanks

toadstoadsonly · 11-18-2011, 09:16 PM

Have you ever heard newells? Mine sound like heck but still cast a mile. As far as the grinding sound try greesing the gears I did this to a couple of my reels and it helped with the grinding. Try it out hope it helps

jorluivil · 11-19-2011, 12:50 AM

If you're capable take it apart and clean it with a clean paint brush. You'd be surprised what a small grain of sand can do to a reel.

Matt · 11-19-2011, 04:52 AM

Send it in for servicing at shimano and it'll be like new!

DESTROYER · 11-19-2011, 07:06 AM

Quote:

Originally Posted by Matt

Send it in for servicing at shimano and it'll be like new!

X2

oneyedeer · 11-20-2011, 07:46 AM

Most obvious is the clicker off? Number two did u buy it brand new? If u didn't it might have a dc paw upgrade very popular and it will make a click sound when u turn the handle

fknricter · 11-20-2011, 11:58 AM

Is the roller bearing greased not oiled? In may be worn out and loud? Does it get louder when theres pressure on the reel? May be another indication of a dry or bad bearing somewhere. Go through it again or send it in?

11-18-2011, 08:05 PM	#1
yaky yak Senior Member Join Date: Aug 2007 Location: Riverside, calif Posts: 130	Shimano Torium . I have had this reel serviced, new drags installed, Can anyone tell me why it sounds like a coffee grinder? I clean it and lightly lube it after each use. Is this just the nature of the beast? It's caught a lot of fish over the years, but its down right embarrassing its so loud. Any ideas? Thanks

11-19-2011, 12:50 AM	#3
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,855	If you're capable take it apart and clean it with a clean paint brush. You'd be surprised what a small grain of sand can do to a reel. __________________ www.facebook.com/Teamsewer

11-19-2011, 04:52 AM	#4
Matt Support your local pangas Join Date: Feb 2007 Location: Lj Posts: 976	Send it in for servicing at shimano and it'll be like new! __________________ Thanks Matt F.

11-20-2011, 11:58 AM	#7
fknricter Senior Member Join Date: Jan 2010 Location: redlands, ca Posts: 118	Is the roller bearing greased not oiled? In may be worn out and loud? Does it get louder when theres pressure on the reel? May be another indication of a dry or bad bearing somewhere. Go through it again or send it in? __________________

11-18-2011, 09:16 PM	#2
toadstoadsonly Senior Member Join Date: Feb 2008 Location: Newport Beach Posts: 149	Have you ever heard newells? Mine sound like heck but still cast a mile. As far as the grinding sound try greesing the gears I did this to a couple of my reels and it helped with the grinding. Try it out hope it helps

11-20-2011, 07:46 AM	#6
oneyedeer Senior Member Join Date: May 2011 Location: Orange County, ca Posts: 684	Most obvious is the clicker off? Number two did u buy it brand new? If u didn't it might have a dc paw upgrade very popular and it will make a click sound when u turn the handle